Please can anyone tellme what this light meens as it comes on at normal running temp and goes off when you either rev or drive but comes back on when standing at lights ect, i have done a oil change thinking it was a service light but it is still happoning
SOURCE: oil light comes on
hi is there a symbol on the light /is there a symbol on the actual oil light
it could be water warning in the fuel filter / change filter ,pressure back up in oil filter /change filter merlin v12
SOURCE: ect power?
The ECT button stand for Electronically Controlled Transmission. In short, what the button does is change the upshift points for the auto trans. Normally, the 1-2 upshift is at 15-19 mph, pressing the button changes the shift mph form 15-19 to 19-22/23. More often than not, this feature wiooould be used if you are hauling a heay load, and the ECT gets you up to speed faster, via the longer time as mentioned above re the shift mphs. Not very useful with normal driving, it really does not do much without a heavy load.
SOURCE: 08 Highlander Indicator light
The icon that you are referring to is the "tire pressure warning" light. This indicates that one (or more) of your tire pressures is below the specified inflation pressure. Note that the SPARE tire pressure is also checked. Best advice: Get a real good tire pressure gauge, and reset all of the tire pressures to specification, which is marked on a sticker on the driver side door opening. Once the pressures are set to specs, the light will go out automatically. This should help you out. Thanks for choosing FixYa.
The graciousness of a FixYa rating would be most appreciated!
SOURCE: TOYOTA LANDCRUISER, A-T OIL TEMP LIGHT COMES ON WHEN PULLING CARAVAN
hi you would have an automatic i have a book manual and the a/t oil temp warns that the automatic transmission fluid temp too high.if it comes on while driving pull over and put the selector in p with engine idling wait till light goes off. if it doesnt contact toyota dealer. might be temp sensor.see how you go with this solution
SOURCE: vsc light comes on when I put in drive or reverse
Have patience and light will go off. Or you can go to advance auto to clear it for you. Or you can disconnect the battery for 10 seconds. Your choice.
254 views
Usually answered in minutes!
×