1994 Dodge Caravan 3.3l #12&32 emission codes

copy and paste

https://www.700r4transmissionhq.com/p0456-dodge-caravan/



..

We had a 96 dodge caravan 3.3l and the filter was part of the tank the bottom. I believe this is the same thing with yours.

P1699 No CCD/J1850 Messages Received From The Climate Control Module (CCM) this should not have anything to do with your emission test. Suggest taking to your local auto parts dealer that will pull the codes from your OBDII for free, check your phone book and call them to ask if they offer this service. most national stores will do it because they will then sell you the parts and give advice on repairs

You can do it yourself, it is under the hood and easy to spot has a huge electrical connector going to it. Contac the company at the website, they can supply a pre-programmed PCM for less than $200.00 (USD) Select your year Dodge Caravan PCM ECM ECU and get back on the road ASAP...

I was working for a company that used 1995 Caravan's for their sales force and I do not know of any sensor. I am confused by the term "cover".

Do you mean valve cover? If so does the sensor go somewhere? I can solve your problem, but I need move info. Please call or email me.

Either,way let me know the outcome. Your feed back is my only reward. Also, please rank my answer with as many thumbs as you think I should get.

TomE(414-475-5968)

Check your fuel cap to see if it is on good.This all deals with that,you may even have to replace the fuel cap.But the emissions can mean a lot of thingsHave the egr position sensor checked and it`s hoses,Check the air filter and have the egr took off and cleaned and checkedI hope this was somewhat helpful,emissons can be trickie.

If you mean code P0441 - This Relates to Incorrect Purge Flow for Evaporative Emission System

Get a Chitlon book for you model at most auto part stores - or on line - or ebay. The book is great for most repair & replacement directions.

Not always. You should check your belt tensioner though to ensure the bearings arent going out or the tensioner isn't bad. Let me know what you find. [email protected] and I will help out more if needed.

p0456--emission control system leak(verysmall) leak, check all hoses to emission controls, cylinder 3 missfire detected. could be plugs, wires, or coil.this is code p0303,