Not sure I follow your question. The security module is built into the instrument cluster and is synced to the engine computer.
when i turn key over starter will not work it is brand new i tested the wiring to the starter they are good
Something is missing then. If you have power to the starter and it is new, it should crank the engine. You have power on the big and small terminals when the key switch is in the start position ?
yes i have power on both ends
If you have battery power on the large terminal, and power on the small terminal from the key switch, and a good ground, it should crank. Have you checked the engine to see if the crank will turn by hand ?
It sounds to me like your battery doesn't have enough power to crank the engine. Just because you can measure voltage at the terminals doesn't mean there will be enough power to start the car. Measure the voltage drop at the terminals when you try to crank the engine. If it dips below 12V your pattery is kaput.
×
13,353 views
Usually answered in minutes!
×