I have a 1989 Mercedes 300E which has had about 15 owners, Over time the Ignition was replaced, I know this cause I ordered the Master Key from Mercedes... Anyway, I have started Wiring the new ignition (universal) and mounting it, the wiring goes: 12V Constant - Red Starter Wire - Purple 12V Iginition Wire - Pink/Red Accessory Wire - Pink/Yellow 2nd Accessory Wire - Pink/Green --Heres the thing, I have 7 wires coming from the Ignition Harness... 2 Red Wires 1 Purple 1 Pink/Red 1 Pink/Yellow 1 Pink/Green 1 Green/White Now I know Purple goes to ST, Pink/Yellow and Pink/Green go to ACC, Pink/Red goes to IGN... but do I wire the two Reds together on Batt... and then what is Green/White for??
Ground maybe.
SOURCE: wiring diagram Ignition switch
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: I bought a new engine
Maybe someone changed those wires on you. Email me pictures at [email protected] so I can get a better look. Also what model MB?
SOURCE: what are the schematics for wirinig an ignition
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
755 views
Usually answered in minutes!
This is not a question on starting, it's a question on how to wire the new ignition.... I have 2 Red wires, do they go together on the switch? And what is the smaller gauge green and white wire to?
×