At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ABS light on meansd your car has the obd2 code problem, you need a scan tool to test out the code, and i know this tool can help you diagnose the code and delete/reset it. Or you can take your car to the local dealer to check out it, then they will tell you how to fix it.
Sounds like the whole shifting unit. It has a printed circuit strip unit that usually goes bad or a switch on the side of the transmission. What code is showing? You need to have it scanned at your VW dealership to correctly diagnose your exact problem
Check the level of the brake fluid, as the pads wear down the fluid level falls slightly and the sensor reacts and gives the warning, it may happen more as you are cornering and the brake fluid moves, try gently topping up the brake fluid it doesn't need much..
These problems do not seem to be related at all. The cause of the warm ac air could be several things from a low refrigerant charge to a plugged condensor fins to the compressor clutch not kicking in. You just have to follow a systematic approach when diagnosing these problems.
you might want to look at the wireing under the floor mat on the driver side. there is a well that water collects in and eats throught the wires. i had this happen to me and found 6 or 7 wires that rotted tru. i fixed the wirs and then used rtv(silacon calk) to cote all the wires to protect them frome more water damage. hope this helps.
abs and brake light stay on.
×