I have audi a3 1.6 2007..My cluster shows only the icon when a door is opened.. how i i can make cluster shows more functions.. for example : km/h../oil service/ water/ celsium and other?
SOURCE: Audi A4 instrument cluster does not work
Your dash has what is known in the trade as a dry solder joint in the instrument cluster it will have to be repaired by people whom specialise in this work.
You could try BBA remanufacture as they do a lot of this type of work for us.
SOURCE: What are the correct tyre pressures for a 2008
Audi A3 Recommended Tyre Pressures 1.6 96 - Onwards 28 28 32 40 1.8 96 - Onwards 28 28 32 40 1.8 SE 96 - Onwards 28 28 32 40 1.8 Sport 96 - Onwards 28 28 32 40 1.8 T Sport 96 - Onwards 28 28 32 40 1.8 T Quattro Sport 00 - Onwards 28 28 32 40 S3 99 - Onwards 30 30 36 40 1.9 TDi - 110bhp 96 - Onwards 30 30 36 40 1.9 TDi - 130bhp 01 - Onwards 28 28 32 40
SOURCE: audi a3 r reg remove inner door panel drivers side
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
SOURCE: NO manual for Audi A3 and radio not working
you can try alldatadiy. that may have the information that you need.
SOURCE: my cluster says 1n2 96 audi a4 2.8
This is not 1n2 , this is IN2 - INSPECTION 2 .
Depens on the mileage it reminds you about scheduled service.
Just a service reminder which comes up at every 15K or 30K miles.
Can be reset with proper scaner.
Don't know if it can be done manually.
297 views
Usually answered in minutes!
×