I want to replace the clutch on my avenger 2.0l and was wondering where the slave cylinder for the clutch is.
First thing to do is to see if you have a clutch slave cylinder or cable operated clutch. Second the slave cylinder is on the end of the lever that goes into the clutch housing Before you change the clutch make sure that the problem is not in the slave cylinder or clutch master cylinder or cable as the case may be.
SOURCE: i have a 94 dodge stealth and when u press the clu...
SOURCE: wher i s slave cylinder loc ated on 1998 doge
inside the bellhousing it is a slave and clutch bearing release collar all in one...
SOURCE: clutch problem,where is the slave cylinder located
The clutch slave cylinder is located on the left side of the transmission, but i believe that the slave cylinder may come with the master cylinder and lines already attached
I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3a3c556b4b17d1d2
SOURCE: clutch problem
i would bleed the system again . make you get strong pressure. if that dose not work check throw out bear fork. it sittes on a ball stud good luck later
SOURCE: 2001 Dodge 1500 4x4, no clutch pressure. slave
air in hydraulic system or throw out bearing bad
659 views
Usually answered in minutes!
×