SOURCE: hub assembly and wheel bearings problem
I just had my wifes replaced.[4x4 blazer S-10] Chev want 300.00 for each, I went on line and got the parts cheap and a friend from chev put them on in his garage. I think the whole thing cost me 200.00
SOURCE: 2001 Chevrolet Cavalier front End Roar
You must replace wheel bearings in pairs to avoid loading the old bearing and, in time ruining your new bearing hub it is possible that you have already damaged the new hub
SOURCE: Loud grinding noise from front end
You can see the brake disc on the front wheels, Check both sides of each side, looking for scoring. Brake pads have wear insicators on them that are metal tabs that contact the rotor (disc) when pads get thin. It would be better to pull the wheels off to get a good look at the pads. Good luck
SOURCE: Rumbling & grinding under front end
Watch out! You might have a loose wheel! Check those wheel nuts. If not, a loose brake caliper, or last if not least, a bad wheel bearing. Don't drive it until you find out what the heck is wrong! Could be dangerous.
595 views
Usually answered in minutes!
×