Question about 2004 GMC Envoy SLT

Open Question

Vacuum hose diagram schematicsdiagram

I need the image diagram for my envoy of the vaccum hoses

Posted by Anonymous on


4 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 17 Answers

SOURCE: I need a vacuum hose diagram for 1999 gmc jimmy

go to a parts store and get the haynes manual. they have them for pretty much everything. they're only like 20 bucks and you can rebuild your car by going through it...they have wiring, vaccuum, brakes, everything. or google it. or check with GM, they should have that info

Posted on May 01, 2010



  • 277 Answers

SOURCE: need vaccum hose diagram for

2002 GMC Truck Sonoma V6-4.3L



Posted on Dec 18, 2010


ZJ Limited

  • 17970 Answers

SOURCE: 1999gmcjimmy diagram for vacuum hose


Engine vacuum schematic-1994 4.3L (VIN Z) engines, California models with a M/T (Code TDK)


Engine vacuum schematic-1994 4.3L (VIN Z) engines, California models with M/T (Code TLM)


Engine vacuum schematic-1994 4.3L (VIN Z) engines, California models (Code TFL)


Engine vacuum schematic-1994 4.3L (VIN Z) engines (Code TFN)


Engine vacuum schematic-1994 4.3L (VIN Z) engines, California models with M/T (Code TCY)


Engine vacuum schematic-1994 4.3L (VIN Z) engines (Code TCU)

Hope helps, keep us updated and remember to rate this answer.

Posted on Aug 10, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to know locations of Vaccum hoses on 2002 ford Econo Van 2.0ltr motor fe model

google images for your : 2002 ford Econo Van 2.0ltr motor fe vacuum hose diagrams.

Mar 12, 2015 | 2002 Ford Econoline Cargo

1 Answer

Need vacuum hose diagram for 2006 4.2 envoy

When the vehicle was built the vacuum hose diagram was on top of the radiator finish panel. If it is no longer there you will have to search for another Envoy and peer at the label on that vehicle.

Jan 29, 2015 | 2006 GMC Envoy 4.2

1 Answer

I have noticed my 2002 GMC Envoy (87,000 miles) loses RPM while idling at the stop light. The RPM jumps between 5000 and 10000 a few times while idle then rests at 5000. I notice this only happens when I...

Probably a Vaccum leak which Vaccum hoses need to be checked or Vaccum hoses needs to be reversed or it could be the position motion sensors.

Dec 21, 2017 | 2002 GMC Envoy

1 Answer

Vaccum hose diagram for 1987 ford ranger needed

CHeck this diagrams...


Fig. 14: Vacuum hose routing-1987 2.9L engine - zoom link here


Fig. 13: Vacuum hose routing-1987 2.3L engines - zoom link here

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 16, 2012 | 1987 Ford Ranger

1 Answer

05 envoy 4.2 code po106

in code reader manual a Po106 is a MAP / BARO CKT RANGE / PREFORMANCE
check vaccume hose to your fuel injection throttle body or map sensor possible leak, plugged, also check map-sensor plugged or damaged while your there check all vaccume line save you time later.

Dec 04, 2011 | GMC Envoy Cars & Trucks

1 Answer

On my 03 envoy 4x4 slt, my service 4wd light came on and of course i can't shift into 4 wheel. what is the most!!!! likely problem? thank-you.

vaccum actuator on the frontend is malfunctioning... check the electronic connection, as well as the vaccume hose running to it, if its cracked, or unhooked it wont engauge in 4 wd.. these actuators are terrible with this problem.. hope this helps you.

Dec 08, 2010 | 2003 GMC Envoy

2 Answers

Vaccum hoses are missing. 1986 Nissan 720 4X4

truck normally has a vacuum hose routing diagram on under side of hood on drivers side.also look for metal tag on center of engine compartment fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of truck..chris

Apr 02, 2009 | 1986 Nissan Pickup 4WD 1986

1 Answer

Vaccum diagram?

Jun 03, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2004 GMC Envoy SLT Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides