Hi Paul,here's how to reset your system.
SOURCE: anti theft device for 97 ford expedition
I have 2007 expedition XLT and the interior light blinking all the time what the solution ?
SOURCE: how do you reset the anti theft system
Try disconnecting your battery cables then wait about 10 minutes. The computer should reset itself. Reconnect the wires to the battery. It is normal for the theft light to blink about every 5 seconds when the ignition key is out or in the off position. This means the system is armed and working properly. Hope this helps. God bless!
SOURCE: how to reset factory anti theft system dodge intrepid
how to reset the anti theft system for my 2006 dodge ram 1500
SOURCE: how do i reset anti theft system 97 chevy
Leave the key on for 11 minutes until the security light stops blinking.
SOURCE: How to remove or bypass the factory installed anti theft vehicle immobilizer.
in the 1996 sunfire GM uses an anti theft lock system. It can be triggered by all sorts of things. In order to relinquish this you must have a key to turn the ignition. These are not coded just plain cut keys. Once you attain this you put the key in and turn the ignition to the ACC position and wait ten minutes (theft lock light will turn off), turn off and take key out. You MUST do this 3 times and then the theft lock will be disarmed.
164 views
Usually answered in minutes!
×