If i relace a seatbelt

There is no resetting a deployed airbag. The air bag module must be replaced and the airbag control module will need replacing along with the seatbelt pre-tensioners.

• Most likely you replaced the clock spring and air bag module right? Well when the srs deploys you also have seatbelt pre-tensioners that are part of the whole retractor assembly and cannot be repaired. Ie either side retractors are not working right , then you need to replace according to chrysler corp.

Your seat belts are tied in to your air bag system. Even though your air bags may not have deployed, your seat belt(s) have deployed a one-time use trigger designed to cinch you tightly into your seat in the collision you were in. There is no way to reset them, they will need to be replaced. A used, functioning seatbelt will work, but usually must be of the same year as your car, even if other years appear identical. The wrong year will appear to the on board computer as an error, and will not allow the system to be restored to functional (air bag light will not go off), even though now your seat belt will appear to function. If your air bag light stays on after the bulb-check sequence at startup, it means the system is disabled...the air bag will not function in a crash.

Hello.
There are quite few components involved in the system that will turn on the air bag light.
Air bags, wiring, seatbelts and sensors are all part of it.
I suspect that when you moved your seat it may have broken a wire near the seat causing the light to come on.
If you want to check for anything obviously broken around the seat area you may be able to save yourself some diagnostic time when you take it in.
Working with air bag systems can be dangerous so I would suggest you take it to an experience mechanic.
Make sure whoever you take it to has the proper tools to do the repair.
Thank you for using FixYa.

KL

you must replace seatbelts of the same type as they work in conjunction with the airbag sensors.just before the airbags go off the seatbelts retract(milleseconds)to pull any slack tight,and you back into the seat,

should replace seatbelt if you were invloved in a accident,the force of a crash will damage the seatbelt internals,cheers roady

most new cars have seat belt pretensioners that fire with air bag deployment these must be replaced.

no, the pre tensioner goes bad(I say your probably have over 100,000 miles on this car), and it is a problem with dodge caravans, plymouth voyagers. You need to check the chrysler web site for recalls on caravans. this may have been on there,

2003 HYUNDAI TIBURON Recall ID from NHTSA: 02V290000 Auto Recall Date: NOV 05, 2002 Vehicle Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Model Affected TIBURON Estimated Vehicles Affected: 7382 Recall Details Auto Recall Date: NOV 05, 2002

Vehicle Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Estimated Vehicles Affected: 7382 Model Affected2003 HYUNDAI TIBURON

2003 Hyundai Tiburon Defect Summary:ON CERTAIN PASSENGER VEHICLES, THE DRIVER SEAT BELT BUCKLE WIRING COULD BE DAMAGED BY INTERFERENCE WITH THE DRIVER SEAT CUSHION HEIGHT ADJUSTER MECHANISM.

Defect Consequence:DAMAGED DRIVER SEAT BELT BUCKLE WIRING COULD CAUSE THE SEAT BELT WARNING LAMP OR THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WIRING LAMP TO ILLUMINATE. IT COULD ALSO CAUSE THE AIR BAG FUSE (CAVITY NUMBER 5) TO OPEN, PREVENTING AIR BAG DEPLOYMENT. NONDEPLOYMENT OF AN SRS AIR BAG IN A CRASH WHERE AIR BAG DEPLOYMENT IS WARRANTED COULD INCREASE THE RISK OR SEVERITY OF INJURY IN A CRASH.

Remedy:DEALERS WILL INSTALL A NEW DRIVER SEAT BELT BUCKLE, IF NECESSARY, AND WILL PLACE A PROTECTIVE COVER OVER THE DRIVER SEAT BELT BUCKLE WIRING TO PREVENT DAMAGE FROM OCCURRING. OWNER NOTIFICATION BEGAN ON MARCH 24, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.

Estimated Vehicles Affected: 7382

Notes: HYUNDAI MOTOR COMPANY 056

There is a gas cylinder that tightens the belt in a minor collision, it is a one time use part it is independent of the air bag deployment system, you will have to replace the seat belt gas cylinder, that may mean a new belt assembly, not sure on focus.