Coil not firing on 2 cly

I answered this a few minutes ago, but my corrected one has vanished.


Question edited for clarity and the correct name of the maker which is written on the rear of the trunk! :>D 'Mitsubishi Eclipse'.

Question moved from Heating and Cooling to the correct Vehicle category of Mitsubishi Eclipse.

Fuse 10 under the hood.

Mitsubishi Eclipse Underhood Fuse Diagram

https://blownfuse.co > mitsubishi > mitsubishi-eclipse-p...Fuse Number Description AMP Rating 1 Fuse (+B) MAIN BATTERY FUSE 80A 2 Radiator fan motor 30A 2.4 liter, 50A 3.8 liter 3 Anti?lock braking system 60A View 23 more rows

• 
  
  
  

Question edited for clarity and the correct name of the maker which is written on the rear of the trunk! :>D
Question moved from Heating and Cooling to the correct Vehicle category of Mitsubishi Eclipse.

Fuse 10 under the hood.

Mitsubishi Eclipse Underhood Fuse Diagram

https://blownfuse.co > mitsubishi > mitsubishi-eclipse-p...
Fuse Number Description AMP Rating 1 Fuse (+B) MAIN BATTERY FUSE 80A 2 Radiator fan motor 30A 2.4 liter, 50A 3.8 liter 3 Anti?lock braking system 60A View 23 more rows

• 
  

  Mitsubishi Eclipse Passenger Fuse Diagram

  https://blownfuse.co > mitsubishi > mitsubishi-eclipse-p...
  Feb 27, 2021 - Below is the passenger fuse diagram for the Mitsubishi Eclipse third-generation 2000, 2001, 2002, 2003, 2004, and 2005 model year.

Crankshaft or Camshaft position sensor, ignition coil or PCM (worst case--not common)

As long as it runs fine on warm days,
I wil advice u to replace the cold start switch,,...

Youre gonna love this. when you open the hood you will see the rectangular air intake right in the front middle. there is a little plastic screw the holds the plastic air intake in place. if it is missing , once you hit about 30mph the plastic air intake will lift up and hit the underside of the hood. blocking air intake will kill all power to the engine.
2 dollar fix at dealer. let me know if thats it!

1999 Mitsubishi Eclipse GS 2.0 liter DOHC L4





1999 Mitsubishi Eclipse GSX (AWD) 2.0 liter DOHC Turbo L4




Hope helps (remember rated this).

no back-firing or anything like that. Double check firing order and how about your plugs/in good shape? How old is the plug wiring? Does the Eclipse have cam senors? If so, I would check them.

get the workshop repair and service manual and fix the problem just go to the given link once you will say thanks to me i am sure http://toolsnyou.com/

On this model engine, the power to the coil pack is delivered directly from the power transistors located inside the PCM.
If you are not getting the signal to fire going into the coil, verify you are getting a good waveform from the crank angle sensor, and that the wiring from it to the PCM is intact. If the crank sensor is delivering signal to the PCM, and the PCM is not generating pulse via the internal power transistors, the PCM has failed (the power transistors blow open, it is fairly common on this Chrysler PCM).

Check all of your fuses and all of the connectors at and near the distributor/coil.