Hi There,
The right turn signal does not make its usual clicking sound when I want to signal a right turn. On the display panel, the usually flashing turning arrow stays on and does not blink. Outside on the car, the lights on the passenger side, front and back also do not turn on nor flash to signal a turn. The left side (driver's side) turn signals are both working front and back.
I bought 2 bulbs for replacement, but cannot get into the space under the car hood to get into the front passenger turn signal bulb. At the back of the car on the passenger side, I unscrewed the top of the light panel, tried to pull it out so I could take a look inside and change the bulb. But there was a lot of creaking and I did not want to pull further and break something.
The car manual does not show you how to change this bulb. I am trying to find the solution on-line.
Help?
SOURCE: Brake light/turn signal no not work on left side only.
check fuse number 7 in Engine Compartment Fuse Box , if its ok you need change turn signal switch
SOURCE: '98 Ford Explorer creaking on turns
Have the shock tower check for the noise. The upper bearing to the strut may be bad
SOURCE: Brake light, Turn signal not working rear right 06' Focus
I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems
227 views
Usually answered in minutes!
×