Hot wire starter you can short out ignition switch and wiring. to jump starter ignition switch start postion.you have to run 10 gauge jumper wire from the starter solenoid positive battery terminal to starter switch or S terminal on starter solenoid this procedure take two people but better remove starter replace starter solenoid. trying jumping off starter on camaro would be dangerous you have jack up car to get to starter and wiring person laying under car hot wiring starter while other person hold ignition start position put person under car in deadly position just remove starter have auto parts check it out first replace starter or solenoid if either bad. easier hot wire starter if starter under hood like my 1977 vega monza had starter at top could take long screw driver jump starter off.on the four cylinders engines back in the 70s. camaro starter under car dangerous trying to hot wire not a good idea.
theres a simple tool available, a remote start switch. it clips on. then the technician gets clear, stands beside, makes sure its in park, blocks a wheel, and presses the switch
oh yeah! he first cleans and tightens the connections, verifies 12.6v is available from the batt and installs the battery ground connection last for electrical safety.
×
490 views
Usually answered in minutes!
×