Dvd screen says Region code not set error. will not play dvd at all. Eject light flashes constantly.
DVD has the wrong region code. C
You can use some dvd copy tools to get a dvd copy without region code. You can try Leawo DVD Copy which can retain the original DVD quality.
SOURCE: A dvd is stuck in my Chrysler town and country
Look around the face plate for a very small hole...use a straightened paperclip or equivalent and press in a few inches...its a manuel door release and you should gain access to at least the loading tray.
SOURCE: error codes 442 and 456 on 2003 Chrysler Town and Country
Could be the gas cap. Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister. I have 2003 T&C and had the small leak and large leak codes. I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser. I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe). The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.
SOURCE: fuse for stereo/cd in chrysler town and country minivan
Its in the box next to the battery and i had the same problem.The fuse is on the first line top.
Thanks
SOURCE: Just bought 2005 Chrysler Town and Country and no
Naturally you could get them from Chrysler parts, if you want to save, go to radio shack and let the associate there check out the jack and he can come up with an inexpensive solution.
2,477 views
Usually answered in minutes!
Message says region code not set
×