ABS light on after changing bearing hub
SOURCE: i have brake light and abs lights on...2001 prius
It's both mechanical and electrical. See an expert to handle this.
SOURCE: 2003 Prius: High pitched noise, ABS & BRAKE Lights on
Check your brake pads first,as they have a wear warning clip on them.so if you hear a loud screaming noise.Then its quite possible they have worn causing ur warning lights to come on.And i would get anouther quote as that is quite dear for a pump replacement.If it is the pump.good luck pippall!!
SOURCE: 2005 toyota prius abs brake not working warning
Hmm, I'm not sure what a main chip is but, there is a few reasons for this problem.
Now when your warning lights go on, the computer sets a DTC code which is the key to helping solve this problem. If you can get the DTC (Data Trouble Code) from the dealership or from someone who can scan your can, I can better assist you in figuring out what's wrong. Hope this helps.
SOURCE: Camry CE 2001: Changed the brake light in the
hi the rear high level brake warning light in rear screen ? works with the other two brake lights at same time when you press brake pedal with ignition on ? so may i suggest you check the other brake lights are working ? if not ? check these bulbs? reason being that from the symptoms you describe that high level light is staying on ? it would suggest that the brake light switch at the pedal is not operating ie not putting brake lights off when pedal is off and would suspect the brake lights have been on for some time and burned bulbs out due to the brakelight element in bulbs are high wattage if you check on what i have suggested? and is the case ? come back and will advise you how to adjust brake switch easy diy hope this helps? best wishes from the uk
Testimonial: "The bulb I used to replace the old one was of wrong wattage. The correct bulb solved the problem. Thanks"
282 views
Usually answered in minutes!
×