Obd connector location - Proton Cars & Trucks

OBD2 connector location in Nissan Rogue (2014 - ...) - Outils OBD Facile
https://www.outilsobdfacile.com > location-plug-connector-obd > Nissan-r...

Easily find where your OBD2 port / connector is located in Nissan Rogue (2014 - ...) using our search engine.

The passenger seat is mounted on the battery/fuse/electrical distribution box. The obd connector is mounted on the front face of that box, or at least that is where mine is located - a round connector with about 30 pins...

OBD2 connector location in Suzuki Grand Vitara (1997 - 2005)

www.outilsobdfacile.com/...plug-connector-obd/Suzuki-grand-vitara-2
Easily find where your OBD2 port / connector is located in Suzuki Grand Vitara (1997 - 2005) ... OBD connector location for Suzuki Grand Vitara (1997 - 2005).

Suzuki Engines Diagnostic Connectors

codes.rennacs.com/Petrol-Engine/Japanese-Korean/Suzuki-Engines.php
Suzuki Engines - diagnostic connector locations, with detailed diagrams, text, and pictures of where to find the diagnostic connector in the vehicle.

It is pre OBD it has the old round diag connector under the bonnet OBD came in around the year 2000

OBD DIAGNOSTIC LINK CONNECTOR2000 Buick Park Avenue 3.8L SFI OHV 6cyl the OBD Diagnostic Link Connector is located: Front seating area, driver side, under dash, mounted under dash on driver side

2000 Buick Century 3.1L SFI OHV 6cyl the OBD Diagnostic Link Connector is located: Front seating area, driver side, under dash, mounted driver side of steering column


Just as reference; if you will send the specific year and model we will can confirm or posted additional details.

Hope this helps (remember to rate and comment this).

In 1995 they made different systems. If it has OBD, then it should be the conventional 16 pin connector, found underneath the drivers steering wheel area. If its the older type, then it has a 2 pin black connector under the center console area. Hope that helps

How to Replace a Throttle Position Sensor
(DIY & Save up to $135.75 ) - Time: 2.1 hours

Parts:
1. Throttle Position Sensor - $ 55.44

Tools:
1. Scan Tool
2. Screwdriver
3. Multimeter

Procedure:
1. Locate the OBD data link connector (DLC). Refer to your owner’s manual for the specific location.

• Tip: The OBD-I data link connector is usually located in the engine compartment near the battery or the fuse box. The OBD-II connector (post 1995 cars) is usually located beneath the instument panel next to the steering column.

2. Turn your key to the“ON” position. Do not start the engine.

3. Plug your scan tool into the OBD data link connector. Turn on the scan tool and select the appropriate steps to read the diagnostic trouble code (DTC).

Scanner plugged into OBD-II data link connector.

• Tip: The OBD-II diagnostic trouble code (DTC) is a 5 character alphanumeric code. The first digit is a letter that indicates the component group, the second digit is OBD mandated or manufacturer specfic, the third digit is a subgroup, and the fourth and fifth digits define the component and basic problem.
  

• 4. Locate the throttle position sensor.

• 
  
• Throttle position sensor
  

• 5. Disconnect the electrical connector from the throttle position sensor.

• 
  
• Electrical connector removed
  

6. Test the resistance of the throttle position sensor (TPS) with a digital multi-meter. If the resistance is out of specifications, the TPS must be replaced.

• 7. Remove the throttle position sensor.



Removing sensor mounting screws

8. Install the new throttle position sensor. Tighten the mounting screws and attach the electrical connector.

• 9. Erase the diagnostic trouble code (DTC) with the scan tool using the“delete” or“erase” command. Road test your vehicle to see if the check engine light returns.

Check engine light


• Tip: If the check engine light returns, repeat the diagnostic process for additional DTCs or take your vehicle to a certified repair shop.

Direct OE replacement

Hope helped with this. Good luck (remember rated this help).

2004 Chevy Aveo LS, the OBD-II connector is against the panel closest to the driver's knees above the brake pedal.

Should b under drivers side dsh

It is under the dashboard, driver side. White, oblong female connector. One row of pins not as long as the other.