It sounds like a broken wire in the passenger door.
SOURCE: power windows/ door locks
you might have left your window cracked and it rained on it, or it could have gone out on its own but it is definately the master control switch, on drivers door needs replacing. hope it helped you.
SOURCE: 2003 Chevy Tahoe. Driver's side power window
check releys and wires in door jam 1 might be broken failing that u need a new switch
SOURCE: 2004 tahoe drivers side controls
If the drivers side does absolutely nothing, there is a chance that power plug that goes into the door has come apart. There is a rubber boot that goes from the cab to the door, that is where the wires run. The power plug is usually right before the boot or right after.
SOURCE: 2003 Tahoe - no of the power options work on the
that sounds strange. you maybe failing to check one fuse. check all locations for fuses in your car. normally under the hood, and under the dash.
it can also be a relay not working, try to follow the cables from the fuse box once you identify which ones are the ones that control those accesories.
SOURCE: no power to drivers door all switces and functions
The door functions in your vehicle are controlled by several control modules and are dependent on proper class2 communications between several modules including
> Body Control Module
> Drivers Door Module
> Passenger Door Module
> Powertrain Control Module
> Instrument Panel Control Module
Begin the system diagnosis with the Diagnostic System Check - Door Systems. The Diagnostic System Check will provide the following information:
> The identification of the control module(s) which command the system.
> The ability of the control module(s) to communicate through the serial data circuit.
> The identification of any stored diagnostic trouble codes (DTCs) and their status.
> The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
372 views
Usually answered in minutes!
×