I ihad a short in the starter circuit that blew the slow blow fuse. I fixed the problem and replaced the fuse. now the truck will turn over and start then die I sprayed carb cleaner in the air inlet with no change,also checked injector pulse and the light lit once and did not light again. help
Your antitheft system is shutting it down. You need to reprogram it. First hook up a battery charger. Then turn the key on. The security light should blink on and off. Leave the key on for 10 minutes. At the end of ten minutes, the security light will stop blinking. When it does turn the key off for five seconds. Then turn the key on. Repeat the 10minutes. Turn the key off then on. Repeat the 10 minutes a third time. At the end of the 3rd ten minute period , start the truck. It should be reprogrammed and continue to run.
547 views
Usually answered in minutes!
will the security light continue to blink? mine alternates between the batt light and security approx 5 seconds each
I checked the light,it was not flashing. I got the codes read and it had a p1336 crankshaft position sensor. I replaced the sensor and it runs. Thanks for the advice and to also help me rule that out.
×