No reception on am only one close fm station comes in

A.m. radio stations have a very limited range and honestly modern units include am reception as an after thought. Unless you are within a few miles of the station you probably won't pick it up. That being said if you are close enough and still cannot pick it up then the radio is probably faulty.

1. Connect the FM antenna and the AM loopantenna at the back of the unit. Rotate the AM loop for better reception.
2. Press AM/FM.
3. Tune a station by pressing TUNER+/-repeatedly until the desired station is found.Alternatively, you can press and hold thesame buttons down for about one second toactivate the automatic search function. Inthis mode the unit will automatically tunefrequencies until it finds a station.
4. Repeat step 3 to tune to another radio station.
5. Press AM/FMto select between FM and AM.Storing Radio Stations

The unit can store up to 40 radio stations (30 preset stations for FM and 10 preset stations for AM) in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order

Automatic Preset Programming
1. Press AM/FM to enter the AM/FM mode.
2. Press and hold AM/FM for two seconds to start automatic preset programming.
3. Radio frequencies will be browsed and radiostations stored automatically. When all the available radio stations are stored or all 40(30 preset stations for FM and 10 preset stations for AM) memory locations are full,the auto preset programming function will stop.

Manual Preset
1. Tune to a radio station (see "Manual tuning"for details).
2. Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press CH+/-, then press MEMORY to store it.

Retrieving Preset Stations
1. Press AM/FM to enter the Tuner mode.
2. Press CH +/- to search up or down for thepreset stations or directly press the numeric buttons.

Check your antenna. If the mast is not extended, your reception will be limited. try an AM station, usually a local AM station will still come in even with the mast down. Have you tried playing a CD (if equipped) ? If that plays well, you've confirmed lack of reception as the problem. If the mast is extended and you still do not have reception, the antenna plug my have come out of the back of the radio. The requires removing the radio to check.

Check the antenna connections.

It sounds like you are just in a weak reception area. If you feel this is not the case first try replacing the entire antenna assembly, it would be the primary cause of this type of problem.

I had the same exact problem. Toyota changed the Amolifier that improved sound quality but not the FM Reception.

THE HARNESSES CONNECTING ANTENNA TO RECEIVER (TWO OF THEM) HAD IAASUES. REPACING THEM FIXD THE ISSUE. FM RECEPTION EXCELLENT NOW !!!!!!!

I really hate to say it, but AM reception has been a problem for over 50 years....that's why FM was invented....

Anyway, if the FM stations are coming in and none of the AM stations are working, the problem has to be inside the radio unit itself.

it might be that your gadget posses a wrong panel written AM when there is no am tuner. If you can check inside it whether it has a choke wound with copper wire for AM reception. If its missing, its aint gonna have any reception

check radio antenna. could be loose connection or antenna missing or broken.

do you get any stations, even weak stations on the AM band?  If not you have a bad radio and need replacement.  Try having someone hold the antenna as you scan the AM band.