Heater core for a 1990 acura integra possibly a step by step diagram?

SOURCE: belt replacement 1990 acura integra

Ok, you will need a 10 mm socket and extension and a 14 and 15 mm wrench. One of the "idler" pullies is actualy an adjustable tension pully. loosen the center nut on the pully, and then begin loosening the 10 mm bolt from above. as you loosen it, the pully will drop, and soon enough you can slip the belt off.
good luck

SOURCE: acura integra 1990 turns over fine but doesnt start

for you to check if it is the fuel pump, see if there is fuel running out of the hose if you remove the fuel filter. Another is to directly connect the pump to the battery. If the pump works that way, then it could be a efi relay issue which is found underneath the dash or a wiring issue.

Jeremy

• 268 Answers
• Posted on Oct 04, 2009

SOURCE: why won't my 1990 acura integra go over 4000 rpm?

Could be fuel filter. This will restrict a lot. If it is automatic it might be your transmission control module. Your check engine light should be coming on if it's not already.

SOURCE: timing belt diagram fo 1990 acura Integra

have fun