Hello,
i have an s reg peugeot 406 2.1 diesel turbo ,i would like to change the cambelt before it breaks is there anyone out there who can help me with this thanks
friend in need of help
How about getting a haynes manual from your library(you may need to order it in)? this is not hard but you need a trolly jack to lift car and then the engine as you have to disconnect the mount at the top
Have you changed a peugeot or citreon 1.9 or1.9 td, if so its the same.
SOURCE: i need advice on a cambelt change on my peugeot 406 1.8 twincam
easy to do ,dont be scared and make sure you remove oil seal in tensioner and put in a drop of oil and some fresh grease refit cover before refitting
SOURCE: i changed the cambelt on a 406 1.9 turbo diesel it
You've probably allowed the crankshaft to move while you had the belt off, putting the timing out by a small amount.There will be some kind of marks top and bottom somewhere to align before you put the belt backon. I need to do this preventative maintenance on my 406 2litre diesel - I'm trying to work out how difficult it is!
SOURCE: Disable passenger airbag on 1998 Peugeot 406
hi there should be a lock barrel somewhere in the front of the carit will be eithe rin the glove box, on the side of the dashboard on the passanger side, in the center console near the handbrake or to the lower right of thr steering wheel on the dashboard
with this you can use your car key to turn off the passanger air bag off (note- this will put the airbag light on)
hope this helps
1,206 views
Usually answered in minutes!
×