My 2001 Mits. Galant es. keeps blowing its number 13 fuse under the hood. i changed the o2 sensors and and it will run for 5 - 10 minutes but when put in gear the fuse blows again. once i change the fuse and try to start it over. the fuse blows when i put the key onto the on position without turning the car over. what can be my problem ?

Marvin

• 85242 Answers
• Posted on Nov 21, 2008

SOURCE: service engine light

You need to have the system tested for trouble codes, Kragen auto and othes do this for free, post the trouble code back here on this thread.

SOURCE: my 2000 mitsubishi galant es went dead, motor will turn over but

do you have spark? How do you know if your timing belt is good? sometimes it doesnt break just shed the teeth which could be missing under the crankshaft. The best way to check is to have two people. have one try to start the car and see if the camshaft is actually spinning. The crankshaft will always turn but if the teeth are gone on timing belt this would cause the belt to stay in one position not moving the camshaft. so if you can remove the upper timing belt cover and do this quick inspection with someone that will tell you for sure. if it does look like it is spinning then by hand turn engine very slowly with plug coil wires removed. and make sure teeth are all there. It couldve jumped timing. (valve timing)

SOURCE: I need a car stereo color coded wiring guide mitsubishi galant ES

They are very easy to find online. Just google wiring diagram for the make and model.

SOURCE: Hello, I have a 96 mitsubishi galant es that wont start

could be the crank sensor, you need to check spark and fuel delivery, if you have fuel then its got to be the high tension side of things that are wrong, does this model run off a coil pack for the ht, could be that, you said you change the alternator, check connections at the rear of alternator, this could be the supply for the ht etc,good luck.

SOURCE: Need Radio/CD CODE for my 2001 mitsubishi galant ES .

http://www.radio-code.com/