The accelerator cable broke on my 89 Geo Yracker and don't know where to find a replacement
SOURCE: heat coming from1997 geo tracker & front tires
sounds like you have a brake claiper piston not return causing the brake pads to drag, jack up both wheels and spin to see if you can feel or hear drag, give the wheel a hard spin and see if it stops right away or seems to spin freely, could be the drag of the pads on the rotor, or wheel bearings need repack or even as much as brake residual fluid pressure on calipers cuased by improper brake mc pushrod adjustment, if you have had any recent brake work like a MC replacement it could be that it was not properly adjusted as far as pedal free play... check those.. please let me know if this helps, rate my help...thanks
SOURCE: 95 geo tracker 16valve won't accelerate unless
timing belt lasts 100k and then slips.
loses power
or
bad MAF sensor.
bad fuel pressure due to bad pump or regulator on front of rail.
can be many many thing , but this is 3 reasons.
SOURCE: Am Replacing Timing Belt On 1990 GEO Tracker 4x4
most of the time there will be one mark on the crank pulley gear and the one on the cam pulley gear.usually a dot or a straight line.
205 views
Usually answered in minutes!
×