04 Lincoln LS V-8 Codes P0300,P0302,P0304,P0308,P0316,P0351,P0352,P0356,P0401,P0420 Replaced 2, 4, 8 coil Packs and plugs. Ran great for 500 miles. Passed car and lost power.Codes P0303,P0306,P0307,P0308 Replaced 3,6,7,8 COP still get codes on start up?PCM?

P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

I tinck yours ignition coils. before you get news echange the coil position of the number 2 and 8 if the codes change to the others cilynders numbers buy news .if nothing change check the conectors and sparck plugs of number 2 and 8.

check spark plug wires and coil packs

I had a similar problem with my '03 RAM 1500 and found a list of codes on a dodge help forum by the name of dodgeforum.com

P1354VVT System Malfunction (Bank 2)

• P0300 Random/Multiple Cylinder Misfire Detected
• P0301 Cylinder 1 Misfire Detected
• P0302 Cylinder 2 Misfire Detected
• P0303 Cylinder 3 Misfire Detected
• P0304 Cylinder 4 Misfire Detected
• P0305 Cylinder 5 Misfire Detected
• P0306 Cylinder 6 Misfire Detected
• P0307 Cylinder 7 Misfire Detected
• P0308 Cylinder 8 Misfire Detected

Probably bad plug wires. Start there and then disconnect the battery for 5 minutes reconnect and start engine to see which codes have cleared.

Have your crank shaft sensor tested.
hope this help.
fixya

Unless your familiar with the cars systems
and I assume your not.
You take it to a repair shop

I have a 2004 LS V8

You can not work on that veh yourself
if your not famialiar with both OBD2
Sytems and the Lincolon LS

If you have a specific few questions
I will answer them.

p0301 p0302 p0304 p0306 these are all misfire codes im gonna put his in simple words for you is the vehicle running good if it is have the codes removed there stored in the computers memory a parts store has a ob2 scan gun they can erase codes have you tried to have them erased now if the light comes right back see what codes its reading now i looked up all the codes there all refering to the work that was done on your car im not saying the work was done wrong but unless you reset the codes now if they come back the p0351 and p0352 has to do with the ignition coil but i promise you this if your car isnt missing with all theses codes then all that has to be done is erase codes get back with me tell me how it turns out some parts are not compatable with foreign cars

Have it current ramped tested . Could be the coil driver (transistor ) inside thePCM - engine computer . Look on youtube testing computer driver .

Part 2 Diagnosing P2305 P0352 P0351 and P0300 Faulty PCM Chrysler How To Diagnose Check Engine Light Codes P2305 P0352 P0351 P0300

CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit