2008 ford focus. windshield washer line was clogged. cleaned line. pump makes noise but nothing comes out. took off nozzles, can blow through line and make bubbles come up in resevoir so line is clear. but when activate pump, nothing comes out?

SOURCE: need to remove windshield washer resevoir

If you here the pump working check the hose to windshield to see it was pinched when closins the hood .I fixed mine wih black electrical tape and it works fine for now.

SOURCE: windshield washer does not work. nothing comes out

Possibilities include a faulty washer pump / fuse , or a clog in water flow between washer fluid tank and nozzles.along with everything in between

SOURCE: 1998 ford expedition front windshield washer

fuse for washer pump, can you here the pump, if not then power to pump isn't present. Check the fuse for it.

Alfredo Mtz

• 102 Answers
• Posted on Mar 02, 2010

SOURCE: Power steering pump

No loud whinning is normal, nor refilling so often; you most likely will have a bad steering pump, but before replacing it check for fluid leaks left on the ground afternight. A broken hose may have provoked damage to the pump by making it work without enough fluid causing it to overheat and damaging the seals. Check for the bad hose first and have it replaced. Good luck

Testimonial: "Thanks so much for your help. "

SOURCE: 2008 Ford Focus Windshield Washer

check the water pump placed under the water bottle or switch the car on dont start it run the water if you dont hear the sound of water pump running its either the pump damaged or something to do with the fuse or wiring