96 honda accord airbag module......

This states is doesn't have an 'illumination wire', but has a 'stereo dimmer' wire.

95/96 Honda Accord Car Stereo Wiring Diagram ' Facebook

https://www.facebook.com > northern-primitive-accord
1996 Honda Accord Car Stereo Wiring Diagram Car Radio Battery Constant 12v+ Wire: Yellow/White Car Radio ... Car Audio Rear Speakers Location: Rear Deck

1995 Honda Accord Car Radio Wiring Diagram - MODIFIEDLIFE

https://www.modifiedlife.com > 1995-honda-accord-car...
How I find a 1995 Honda Accord car stereo wiring diagram? Whether you're an expert Honda Accord mobile electronics installer, Honda Accord fanatic, or a novice ...

Location of airbag module Mike, Air bag module is under right front seat.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
GM Saturn Airbag Air Bag Black Box EDR Event Data Recorder SDM Deployment...

images for transmission vacuum

Vacuum Modulator Service.wmv - YouTube

? 6:00
www.youtube.com/watch?v=u7S9mDqWguY
Dec 19, 2011 - Uploaded by GrumpysTravells How to remove and clean the vacuum modulator air filter. ...Transmission modulator replacement (early GM 4T60-E models) -

Cory and Ray, Check the attached links,instruction and guides on AC fuse location. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to diagnosis and change the fuse of Honda Accord 2007
2007 Honda Accord Sedan AC fuse Google Search
Is diagram of 2007 honda accord fuse panel available online

have a look here http://techauto.awardspace.com/ hope this helps and if you need any more info/technical data, just ask

The airbag module is integral with the airbag. The entire airbag assembly can be removed from the steering wheel with a special tool (contact your dealership to find out which tool this is).
I would highly avoid getting such crucial components from ebay - once again, go to your dealership.

find one used on ebay, then you will know the price. call a dealer and ask how much labor to replace an airbag. add the two and then you will know. i would want a dealer to replace this item, you may need a clock spring contraption too, ask the dealer.

Read this carefully, in total, before you begin.

With car wheels aimed straight ahead, disconnect the neg. battery terminal (if you have an anti-theft radio, make sure you have the code, because you will need it.)

Wait three minutes before proceeding to allow the airbag’s backup power supply to be depleted.

Remove the access plate from the lower steering column cover and remove the short connector from the access plate (the short connector is stowed on the inside of the access plate. It is a little device that is used especially for this purpose)

Unplug the airbag module-to-cable reel connector (yellow) and plug the short connector into the airbag module side of this connection to disable the airbag.

Remove the access panels from each side of the back of the steering wheel cover, then remove both of the torx screws (you’ll need a torx screwdriver) that retain the airbag module to the steering wheel.

Pull the module off the steering wheel and CAREFULLY set it aside with the trim side facing up.

Unplug the electrical connector for the horn, and, if you have it, for the cruise control.

Remove the steering wheel retaining nut. Paint or scribe a mark indicating the relationship of the steering wheel hub to the steering shaft.

Remove the steering wheel with a steering wheel puller. DO NOT turn the steering shaft while the steering wheel is removed. If you do so, the airbag reel could be damaged.

Reinstallation is the reverse of the removal, making sure the cable reel is centered with the car wheels straight ahead (if you haven't moved the shaft, that should not be a problem), and making sure that the locating pins on the steering column engage the holes in the back of the steering wheel. Put the nut back. Torque it (36 ft. lbs). Reconnect horn and cruise control. Replace airbag, tighten torx screws. Reconnect airbag and put short connector back in access plate. Reconnect neg. battery cable.

Hope this helps you.

Pop open the left side and follow the same pattern. ;o)

it is positioned in the very centre of the dash board, behind the radio/Air con unit, it is bolted to the floor, you will need to remove the dash board and possibly the air con unit to access. once the module and air bags have been replaced it shouldnt need anything else.