When i bought it the people befor me replaced the alternater and bypassed the factory computer now I can't get it to charge right or run right...they also had lots of sound and t.vs. in it ....I have replacedthe alternater again my self but can't figure out why its not recharging....
They bypassed the factory computer ? That computer is the brain behind everything electrical in that vehicle. You can't expect it to operate correctly if something is bypassed. If you can , put it back the way it should be and see what happens.
First check the battery and connections.
SOURCE: change a serpentine belt on 04 jeep grand cherokee laredo
Check this link & scroll down to your engine. Click on picture to expand.
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528004328a
SOURCE: 2000 Jeep Grand Cherokee Laredo Door Locks Dont' Work Correctly
you need to check wiring between lf door and body..peel back rubber boot and pull on wires..you will find 1 or more broken wires..can be repaired
SOURCE: 1995 Jeep Grand Cherokee Laredo - sunroof leak
lift rubber edges and apply clear silicon sealant under edges let cure hose with water to test, if leak then seal edges of glass with eurothane sealant, not silicon will rot in sun within year
SOURCE: My 97 jeep grand cherokee makes a chirping sound under front
The noise and the light may or may not be related. The noise may be the wear indicator on the brake pads touching the rotor (they are supposed to do that when brakes are worn) The abs light triggers off a wheel on the axle end. If you have a bad joint on the axle, it could be noisy and causing the wheel to not have the proper clearance to the abs sensor. You really need to take the wheel and brake assembly off and carefully inspect everything. Make sure all abs sensor wires are undamaged...it doesn't have to be at the same wheel that's chirping.
Testimonial: "Thanks so much, this makes sense I will have it checked out right away. I really appreciate your help."
121 views
Usually answered in minutes!
×