The window came off the clips that hold it to the regulator. I'm trying to put it back like it was. Where should the clips be positioned to reattached to the window. The clips can be moved forward and backwards on its track. I want to get it right before gluing it. Thanks for the help.
SOURCE: 1999 ford expedition with a passenger, front window stuck in the down possition
Hi,
Initially, try to determine which fuse goes to the power window. Check and replace if necessary.
In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.
Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.
Incidentally, here is a nice tutorial on repairs of power windows in general.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
SOURCE: 2000 ford expedition
you need to use a plastic pry bar to remove the door panel. Also move the speaker grill is available.
SOURCE: 99 FORD TAURUS driver SEAT RAIL TRACK
U will need to replace the power seat transmission, the gears are most likely stripped out, not uncommon, this part is $800 so i would suggest u try to locate a used one.
SOURCE: My power window came off track
There are 2 screws just above the door handle you need to remove. Remove the plastic trim around door handle. Then starting at bottom of door panel pull out to disengage the push pin clips and work your way up both sides of panel. Then lift up on door panel to disengage the weatherstip on top of panel.
SOURCE: Power Seat Control does not move the seat front or back
Try tapping the power seat frame with a hammer to unbind the motor .
272 views
Usually answered in minutes!
×