SOURCE: 89 honda prelude power steering belt
there is an adjustment bolt on the back side of the idler pulley . you just loosen up the nut on the front of the pulley , then turn the 12 mm bolt under the pump on the back side of the pulley.
SOURCE: transmission solenoids Prelude
Which tranny solenoid are u reffering to? What is the actual problem u r having?
SOURCE: how to bleed rear brakes
the best rule of thumb is to work from the closest bleeder to the master cylinder, it does take two people!!!!!!! one to pump the brakes and one to open and close the bleeder.
1. fill the resivor
2. pump the pedal all the way down and up, tell the pumper to hold down.
3. crack open the L-F bleeder untill the pedal goes all the way to the floor.
4. repeat untill you get brake fluid with no air bubbles.
5. you MUST do all wheels no matter what!!!!!!!!!!!!!!
6. please do it in this order left froont, right front, left rear, and then right rear.
7. just pump and hold, open bleeder, close bleeder, and repeat for each wheel.
8. make sure to keep filling the fill point on the master cylinder.
SOURCE: How do ya proprly bleed brake/power steering on a
leave the cap off the top jack up front end and tern weels all the way to the right then to the left over and over till the flued isnt fomey..
SOURCE: have a 97 honda civic, hard to steer.repaced p/s pump
hard to steer is not the pump in most cases, it is the power steering rack and pinion steering gear.
203 views
Usually answered in minutes!
×