2007 Suzuki Forenza ac/heater/defrost fan not working

Colin Stickland

• 22516 Answers
• Posted on Jan 23, 2009

SOURCE: How to repair Suzuki Forenza interior driver's door handle?

you answered your own question,ease the door panel with two screwdrivers ,one either side of the plastic clip and watch for the mastic

SOURCE: 2005 Suzuki Forenza AC leaking

the dealer is right, replace cycling switch, and look for cracked ac/heat case

Testimonial: "Thanks that is very helpful. "

SOURCE: 2005 Suzuki Forenza timing belt breakage

hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart

Testimonial: "Really Fast Reply with very good information. THANKS!!"

Ronny Bennett Sr.

• 6988 Answers
• Posted on May 01, 2010

SOURCE: AC has freon (134a) pressure is good. Compressor

Have a code reader or scanner put on the car to erase all codes,this should reset the ac system circuit.Also check the low side clutch cycle switch,it may be the problem.

Testimonial: "Tried those but thanks for the fast responce"

SOURCE: 2007 Suzuki Forenza. It is

Ok what you are experiencing is referred to as a shift interlock problem. First thing I would do is check to make sure that when you apply the brakes that the brake lights are coming on. There is a switch mounted on the brake pedal that activates the lights and also dis-engages the shift interlock. If this switch is bad the brake lights wont work and the shifter will not move. Replacing the switch will restore normal operation. If you have a copy of the owners manual you should be able to locate the instructions on how to bypass the shift interlock. If not then look at the cover around the shifter and you should be able to see a plastic oval shaped plastic plug. Pry the plug out and use a small screwdriver to press down on the interlock and it should come out of park. You can shift freely when out of park but remember you will have to perform that every time you need to come out of park until repaired. Hope this was helpful and good luck.