SOURCE: need to know about changing the timing belt on my 2001 mitsubishi
This will take about 3-4 hours. If you look at the drive belts, they will all have to be taken off to get to the timing belt. The engine crankshaft has to be positioned for marks to line-up. The crankshaft will have to be prevented from turning so you can take off its drive pulley. Rotate until the alignment cylinder is near TDC, remove sparkplug, then packing a small rope on top of the piston prevents the engine from turning.. Once you change one timing belt, you will never buy another car with a timing belt again. You can get a manual on eBay.
SOURCE: 2001 mitsubishi galant trunk problem
yes a screwdriver or pliers depending if you can see the lever from where the key fits from .just turn it or open the lock itself
SOURCE: need the vacuum hose diagram for a 1998 mitsubishi eclipse
http://www.dsmtuners.com/forums/attachments/420a-bolt-tech/89827d1228187918-resolved-need-vacuum-line-help-fast-420aturbovac-boostlinesstock.jpg
hope this helps
SOURCE: Need help in locating starter on a 2001 mitsubishi
they at the back of the motor just at the top or could be at bottom at back of gearbox
SOURCE: diagram for serpentine belt on a mitsubishi galant es
My sincere apologies for the severely delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2002/make/mitsubishi/model/galant/2002_mitsubishi_galant_drive_belt_routing_diagram.htm
181 views
Usually answered in minutes!
×