When my head lights are on they do not work, when I switch them to high beam they do work. it seems that the low beam bulbs will only work when on high beam?
SOURCE: 1990 525i bmw headlights
Check the wiring in the lights it may be poor construction or mis care that has madr a wire become looseand only rarely turn on
SOURCE: burned out headlight/bulb bmw 1991 325i 2dr
It's a bulb replacement. If it's anything similar to my Audi, there is a cover on the back of the headlight housing that you pop off. Then you can reach in, pull the wire connector off the bulb, and unclip a metal retainer over the bulb, and pull the bulb out. Installation of the new one is the reverse. Just be SURE not to touch the glass part of the bulb. Skin oils can cause a halogen bulb to burn very hot and burn out very quickly. If you do touch the glass, wipe it gently but thoroughly on a cotton cloth to clean it off before you install it.
SOURCE: check low beam light - light goes on and off - wiring issue?
MAY TRY CLEANING THE BULB CONNECTION WHERE THE BULB SITS ON THE PLUG IN OR CHECK FOR A BAD OR LOOSE GROUND WIRE
SOURCE: 2002 BMW 330XI, high beams do not come on fully
check fuse and relay, if its good, than you have faulty switch, only work on low but not high beam, to turn high beam on the switch move forward which is fauty or no contact, flashing high beam move toward you which has a good contact and working. it two switch in one unit.
SOURCE: 2004 BMW X3 driver side low beam headlight
remove the air filter housing ,simple .this programme has a spell check thingy working and its driving me nuts ,it cant identify plain english ,write colour and it squiggles it out but color is ok .
161 views
Usually answered in minutes!
×