Hi,
Does any one have a schematic or instructions on How to install a front bumper cover and front passenger side splash gaurd or (wheel well) on a 2002 Toyota Corolla and would you know what aftermarket or OEM retainer clips I need to purchase for installation. Thanks for your time and have a blessed weekend.
Bruce
Try this link for the bumper cover.. How to install front bumper cover on 2002 Toyota Google Search .
or this link..
How to install front passenger side splash gaurd 2002 Toyota Google Search
SOURCE: Remove rear plastic bumper cover
please email me at [email protected] with any other info or questions if you have already gone to a body shop
SOURCE: 1995 Toyota Corolla Door Handle
It's advanced. Briefly, you'll have to take the door panel off, and then disconnect the door handle linkages, and then unbolt the door handle from the inside. You'll have to manuver around the window and window regulator and wires and swtiches. And that's after you successfully remove the door panel itself, which in itself can be quite trickly without advance tools. At this time you **** your new door handle (hopefully it's paint matched) and hook everything back up. If you'd like to tackle it, you could get more detailed info.
SOURCE: 05 corolla oem power door locks and windows install
All of the power locks and power windows are directly ties into the "Integration Relay". This is the large white box behind the fuse panel under the dash. There are 2 different Integration relays, one with electric windows, and one without them. You may need to change the integration relay, also.
SOURCE: vacuum line schematic 1987 toyota corolla le front wheel drive
It is similar to my rear wheel drive two door.
The main vacuum line from a vacuum source on the intake goes to the multi-hose valve on the top and the distributor vacuum advance.This multi-valve switching valve is the main connection to the other vacuum hoses on mine. Two lines come in from a vacuum source and thre go out to three components according to tempature. On mine the middle one off to side 1)goes to choke opener and switching vacumm valves mounted on the fenders the other middle one 2)second from top goes to another choke opener and EGR Valve and EGRModulator. The bottom hose connection is on when cold 3)and goes to a part on the carburator to help it run better when warming up a AAP valve.
There is a check valve diaprham thing inline to the EGR vlave on the second line from top.
I have another vacuum line on the drivers side of the carburator that has a check vlave inline but larger it goes to the throttle linkage to help slow the closing of the trottle on rapid deceleration.
SOURCE: My Toyota Corolla rear bumper has at big dent on
you have to take the whole bumper off and the bolt the u see holding it on the re-bar and bumper cover should come off
To install:
If the headlight is damaged, cut off these retainers
Install new headlight retainers
615 views
Usually answered in minutes!
×