MY #2 CYLINDER IS MISFIRING ON A 2004 F-150 SUPER CREW CAB

Ford had nothing but problems with the 6.0 l diesel with a ford scanner test the injectors (buzz test) and cylinder contribution test find misfiring injector.

The SES light flashing means the engine management software has detected a misfire condition resulting in exceeding 3 times the federal limit of emissions. Under heavy load such as acceleration one or more cylinders are misfiring and once cruising speed is reached the engine is under a lighter load (10 to 20 percent ) that is why it stops flashing several causes of misfires are worn spark plugs ,spark plug wires, faulty ignition coil or coils fuel injector or fuel pressure problems a quick check of the computer to retrieve trouble codes should identify the problem cylinder or cylinders and will direct you in the right direction to find the faulty component but will not tell you exactly what is wrong certain test must be performed to isolate the cause.

There are few possibilities that can cause engine misfire issues. It can be issue with spark plugs or faulty spark plugs. Also get the compression test done for cylinders. If any of cylinder shows low compression then required, then that particular cylinder will cause misfire.

Also get obd codes scanned, the error code will let you know which cylinder is misfiring or all cylinders are misfiring.

-----------

For your trouble shooting I suggest you to refer the help oinks below. It has step by step details for many engine misfire issues.

----------

Click the link below:-----

Ford Explorer Cylinder Misfire?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-cylinder-misfire.html

---------

Engine Misfire codes on Chevrolet Malibu?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

---------

Cylinder 6 Misfire?

http://howtobyme.blogspot.com/2011/12/cylinder-6-misfire.html

------------

Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

----------

Ford Explorer 5.0L: Engine Miss?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-50l-engine-miss.html

-----------

Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

------------

Can cylinder misfire Damage the Catalytic converter?

http://schematicsdiagram.blogspot.in/2012/02/can-cylinder-misfire-damage-catalytic.html

------------

Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-----------

Chevrolet K1500 No spark, random misfire

http://repairhelpcenter.blogspot.com/2012/11/chevrolet-k1500-no-sparkrandom-misfire.html

-------------

2004 Ford F150: Engine Misfire and Lean Code?

http://whatisbyme.blogspot.in/2012/05/2004-ford-f150-engine-misfire-and-lean.html

-----------

1995 Toyota LS: Misfire at idle or low RPM

http://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

--------------

Toyota Corolla: Random Misfire?

http://technoanswers.blogspot.in/2012/04/toyota-corolla-random-misfire.html

----------

2006 Ford Freestar: Misfire on Cylinder Number 2?

http://whatisbyme.blogspot.in/2012/06/2006-ford-freestar-misfire-on-cylinder.html

-----------------------------

This will help.

Thanks.

There are few possibilities that can cause engine misfire issues. It can be issue with spark plugs or faulty spark plugs. Also get the compression test done for cylinders. If any of cylinder shows low compression then required, then that particular cylinder will cause misfire.

Also get obd codes scanned, the error code will let you know which cylinder is misfiring or all cylinders are misfiring.

-----------

For your trouble shooting I suggest you to refer the help oinks below. It has step by step details for many engine misfire issues.

----------

Click the link below:-----

Ford Explorer Cylinder Misfire?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-cylinder-misfire.html

---------

Engine Misfire codes on Chevrolet Malibu?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

---------

Cylinder 6 Misfire?

http://howtobyme.blogspot.com/2011/12/cylinder-6-misfire.html

------------

Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

----------

Ford Explorer 5.0L: Engine Miss?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-50l-engine-miss.html

-----------

Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

------------

Can cylinder misfire Damage the Catalytic converter?

http://schematicsdiagram.blogspot.in/2012/02/can-cylinder-misfire-damage-catalytic.html

------------

Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-----------

Chevrolet K1500 No spark, random misfire

http://repairhelpcenter.blogspot.com/2012/11/chevrolet-k1500-no-sparkrandom-misfire.html

-------------

2004 Ford F150: Engine Misfire and Lean Code?

http://whatisbyme.blogspot.in/2012/05/2004-ford-f150-engine-misfire-and-lean.html

-----------

1995 Toyota LS: Misfire at idle or low RPM

http://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

--------------

Toyota Corolla: Random Misfire?

http://technoanswers.blogspot.in/2012/04/toyota-corolla-random-misfire.html

----------

2006 Ford Freestar: Misfire on Cylinder Number 2?

http://whatisbyme.blogspot.in/2012/06/2006-ford-freestar-misfire-on-cylinder.html

-----------------------------

This will help.

Thanks.

For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

I would definitely scan the computer for the codes that are stored when the check engine light comes on and it misfires. One should know which cylinders are misfiring which could indicate a bad spark or bad fuel delivery to a particular cylinder or cylinders.

Then, if it is a random misfire, it may be a bad O2 sensor that is causing the problem.

The clicking sound when it won't start has to do with the battery or the starter not getting enough current from the battery. A new battery may be recommended after 3 years of service on average, I learned at Sears. Probably the starter is ok but I wouldn't rule it out as something that could be changed if a new battery is installed and it still does it.

Cylinder #2 will be the second cylinder from the front on the passenger side, and here is a diagram to help assist you.

I would say to replace the sensor and see if it helps. I assume you had the truck scanned and that was the only problem. The speed sensors usually relate to the ABS and Transmission shift points.

Both Autozone and Oreillys will scan for FREE. After you replace the sensor, get a water spray bottle and go around all the seams you can find on the engine while it is running. If the RPM changes you have found the vacuum leak that is causing the miss.

There is also another test that can be done electrically. It is the cylinder balance test. This directly relates to the compression of each cylinder.
While all the Diagnostics that showed the fault are accurate, the onboard computer does not tell everything.

Usually it can miss the mechanical issues like a vacuum leak, or a bad valve in a cylinder that is firing good electrically without the whole bank running rich with the unburned fuel from that one cylinder. This is because it averages the total burn rate for each bank.

On the V8 engines there are cavities below the Airhorn for EGR flow. If your V10 is similar you may want to look under the Airhorn gasket and clean the cavities. It should only cost your time and a gasket.

dirty fuel injectors and weak fuel pump or clogged fuel filter.a faulty tps sensor and air leak at the intake duct.all these problems will cause stumbling on acceleration.

This could also be a leaking plug wire or an injector that is clogged. A simple test is to try to isolate the cylinder that is causing the problem and check to see if it is getting steady fire and fuel. Hope this helps. Good luck.