SOURCE: I need a diagram show me how to replace the
HI. The first link will be the routing with the AC, and the second link will be without the AC Compressor. Click below to access both diagrams.
CLICK HERE FOR THE ROUTING WITH AC.
CLICK HERE FOR THE ROUTING WITHOUT AC.
SOURCE: replacing serpentine belt for dodge ram 3500 diesel
5.9L DIESEL
The 5.9L diesel engine accessory drive system (with a/c) consists of :
CAUTION:
When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1.
Position drive belt over all pulleys except water pump pulley.
2.
Attach a 1/2 inch ratchet to tensioner.
The 5.9L diesel engine accessory drive system (without a/c) consists of :
3.
Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.
SOURCE: I need a diagram for replacing the serpentine belt
if you buy your belt at autozone the routing is on the package
9,608 views
Usually answered in minutes!
×