What's your problem?head bolt torque wrench settings 2.8ltr diesel hilux 3l

https://www.google.com/search?q=2012+chevrolet+captiva+2.2+VCDi+diesel+cylinder+head+torque+specs

https://www.google.com/search?q=2012+chevrolet+captiva+2.2+VCDi+diesel+big+end+torque+specs

Not too much information on the 2.2 diesel. A service manual is the best idea.

..

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

Wiring, schematic, electrical diagrams, torq settings, parts info, error/fault codes, full assembly/dissembly, service instructions an d a lot moreetc are basic contents of these online books they here on this website https://big-manuals.com/

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few like.. reliable-store .. let me know if u need help
thanks

The torque settings for the cylinder head on a 2003 Ford Ranger 2.5 turbo diesel WLT engine are as follows:

• Main cap bolts: 70 Nm (52 ft-lbs)
• Head bolts: 65 Nm (48 ft-lbs)
• Rocker arm shaft nuts: 25 Nm (18 ft-lbs)

It is important to note that these torque values are for the cylinder head bolts and main cap bolts only. Other fasteners on the engine, such as the oil pan bolts, may have different torque requirements.
It is also important to use a torque wrench and follow the proper tightening sequence when installing the cylinder head. Consult the service manual for your vehicle or a repair manual for the specific tightening sequence and additional torque specifications.
I hope this information is helpful. If you have any further questions or need additional assistance, don't hesitate to ask.

Torque Settings Mains = 108NM
Big Ends = 54NM + 90° +90°
Flywheel = 122.5NM
Cylinder Head = 78 NM + 90° + 90°

Valve Settings
Exhaust = 0.40 mm - 0.50 mm
Intake = 0.20 - 0.3 0mm

is 6.5l-7.0l dependse from the size of oil filter (10w50 or 20w50)

you should be able to look up a utueb video on the Hilux diesel 3I shod fine vids of someone who has dont the job also you can look up the item here and find anything else you need >>>www.discountbargainprices.com

Check in this manual

http://www.championbrands.com/aera-torquespecs.pdf

what is the valve clearance and cylinder head torque for toyota 2lt diesel engine

kasim