Question about 1997 Mercedes-Benz E-Class
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hello, The blower motor is located below the windshield wiper assembly. You have to remove the plastic cover that below the windshield then remove the wiper assembly, then you will see the blower housing. Remove the screws from the housing then remove housing cover. Look close because some of the screws are hard to see. Once you get the cover off, you will see the motor and there is a metal strap that holds it down. Take a punch or whatever and stick it in hole in the strap and push down. Then the motor will come out.
I hope this helps.
Posted on Feb 06, 2009
hello,good day,first try to check your blower switch,if not corrected,your blower resistor is located at the bottom of your brake booster,ty
Posted on Jul 25, 2009
SOURCE: i have a mercedes benz
The heater blower motor is located outside under the front scuttle panel, the plastic are where the wipers bolt on. You should extend the bonnet to its horizontal position, remove the wiper arms, then carefully remove the rubber seal and plastic scuttle panel trim.Some edges are sharp so be careful. Be careful not to loose any clips or rubber seals. You will see the blower motor now. Make sure the ignition is off and you have the key as someone could accidentally operate the wipers or the heater blower, the former can take your fingers off. Anyway the resistor is under the motor, unplug it and remove. Refitting it a reversal of the above.If you ever have to remove the wiper motor arm from its spindle ensure you index mark it first !
Posted on Feb 03, 2011
Hi, Fold mirror in towards car and you will see an inspection hole at the bottom left of the end of the mirror housing. Insert a flat blade screwdriver into the hole and press against a small metal clip. you will feel the clip move and the housing will then slide off allowing you to unclip the glass
Posted on May 05, 2011
Tips for a great answer:
Mar 05, 2018 | Cars & Trucks
Sep 13, 2014 | 1989 Mercedes-Benz 300-Class
Apr 01, 2014 | Mercedes-Benz C-Class Cars & Trucks
Mar 10, 2014 | 2000 Mercedes-Benz S-Class
Feb 03, 2011 | 1998 Mercedes-Benz C-Class
Jul 19, 2009 | 1994 Mercedes-Benz C-Class
Jul 12, 2009 | 1994 Mercedes-Benz C-Class
Aug 18, 2014 | 1997 Mercedes-Benz E-Class
Jul 03, 2014 | 1997 Mercedes-Benz E-Class
176 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: