I want to see a picture or a diagram of where the vacuum line for reverse is on a 2001 2500 Chevrolet silverado

Mike Butler

• 6674 Answers
• Posted on Mar 07, 2009

SOURCE: vacuum line diagram 98 chev monte

No sticker on underside of hood or on rad support showing that?

SOURCE: Need vacuum diagram

I can't send you a diagram but I can tell you the basics that should get you mobile. Take a vacuum line from the lower front of your carb and hook it to your distributer vacuum advance. Take another from the front of your carb and run it to your EGR valve. It should be beside the carb on the intake manifold. At the rear of your carburator there is a large line coming out. It should be steel. It provides vacuum boost to your power brakes. Hook it up. Make sure all other vacuum outlets on the carb and intake are blocked off and you should be able to get mobile.

SOURCE: 02 Chevrolet Silverado z71 5.3 L wont go into reverse

Usually reverse is the first gear to go out in these transmissions (auto) probably a 4l60E model transmission Im guessing

SOURCE: need vacuum line diagram for 1990 Chevy Silverado

The vacuum diagram for the truck should be printed on a factory sticker right next to the hood latch inside the engine compartment. If its missing or ruined you could try looking inside a Chilton or Haynes manual.

Mitch Davis

• 95 Answers
• Posted on Mar 31, 2010

SOURCE: does anyone know where I can find a diagram for the knock sensor location on a 2005 Chevrolet Silverado?

under the intake manifold on a 5.3,theres 2 of them