I went to start my 96 jeep and the alarm is flashing and it won't start up, how do I get this problem solved so I can go to work
Try the 15 amp fuse under the hood by the battery if its blown put in a 20.
turn on the key and wait for all the ligth to go out then try it if it dosnt start the first time do it a 2nd same thing
hope it helps
Check your starter wire as mine was loose and did the same thing every time you interupt power to the alarm system it will flash the lights unlock the drivers door with the key and this will rearm the alarm and the jeep should start up if this is the problem rember to have good battery conections and a good batt first or else this will keep hapening also after 20 starts you may have to do the key thing again
633 views
Usually answered in minutes!
×