BMW ICOM do air suspension? I mean air suspension calibration or reset? Thanks

Except English, German and Chinese, if you install BMW ICOM in the other language, you will get the same errors.

To reset oil light put the key in on, without turning on the engine, press gas pedal 3 times and u will hear a sound when reset.--------------------------------------------------------------------------------
BMW ICOM ISIS

seems to be in the fuse panel, it's the large silver round fuse.
---------
BMW ICOM ISIS ISID

P0310 Cylinder 10 Misfire Detected
P0710 Transmission Fluid Temperature Sensor Circuit
P1700 Transmission Indeterminate Failure (Failed to Neutral)______________
BMW ICOM ISIS ISID

Since the "Service Engine Soon" Light is primarily an emissions monitor there is no need to panic. Unlike the overheat or charging system red warning lights that require an immediate shutdown of the engine, this one is advisory and is yellow or orange. Even though it doesn't indicate the car is likely to quit, it is calling out for help. Think of the "Service Engine Soon" lamp as if it were the glowing tip of a cigarette. Your car is polluting as well as performing below its design potential.


-------------------------------------------------
BMW ICOM BMW ISIS ISID A+B+C Plus

When the Trac off light is blinking it indicates an issue with the ABS system.


-----------------------------BMW ICOM BMW ISIS ISID A+B+C Plus

The P0732 means Gear2 Incorrect Ratio.
---------

BMW ICOM Server ISIS+ISPS+ISID+ICOM

You can choose a diagnostic then test it by your self
http://www.chinasinoy.com/wholesale/newest-diagnostic-bmw-icom-server-isis-isps-isid-icom-2091.html

yeah, the P1297 means "Injector High Sides Shorted Together", but the P0343 means "Camshaft Position Senor "A" Circuit Hight Input (Bank 1 or Single Sensor)
bmw icom isis isid