Smart key error

Your best bet , take it to a qualified repair shop .
SMART ENTRANCE CONTROL UNIT PFP:28596 Description EKS003A2 OUTLINE The smart entrance control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger and door mirror defogger ? Power door locks ? Remote keyless entry system ? Vehicle security system ? Interior lamp ? Battery saver control BATTERY SAVER CONTROL Interior Lamp/Map Lamp/Vanity Lamps The lamps turn off automatically when the interior lamp, map lamp or/and vanity lamps are illuminated with the ignition key in the OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in the ON position for approximately 10 minutes. After lamps are turned off by the battery saver system, the lamps illuminate again when: ? Driver's door is locked or unlocked, ? Door is opened or closed, ? Key is inserted into or removed from the ignition key cylinder. Rear Window Defogger/Door Mirror Defogger Rear window defogger and door mirror defogger are turned off approximately 15 minutes after the rear window defogger switch is turned on. INPUT/OUTPUT

Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in smart entrance control unit)

Nothing for you to remove ! Without a factory scan tool U can do nothing .
TIME CONTROL UNIT PFP:28491 Description (Without Power Door Locks) EKS003A6 OUTLINE The time control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger INPUT/OUTPUT System Input Output Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in time control unit) Rear window defogger Ignition switch (ON) Rear window defogger switch Rear window defogger relay

SMART ENTRANCE CONTROL UNIT PFP:28596 Description EKS003A2 OUTLINE The smart entrance control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger and door mirror defogger ? Power door locks ? Remote keyless entry system ? Vehicle security system ? Interior lamp ? Battery saver control BATTERY SAVER CONTROL Interior Lamp/Map Lamp/Vanity Lamps The lamps turn off automatically when the interior lamp, map lamp or/and vanity lamps are illuminated with the ignition key in the OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in the ON position for approximately 10 minutes. After lamps are turned off by the battery saver system, the lamps illuminate again when: ? Driver's door is locked or unlocked, ? Door is opened or closed, ? Key is inserted into or removed from the ignition key cylinder. Rear Window Defogger/Door Mirror Defogger Rear window defogger and door mirror defogger are turned off approximately 15 minutes after the rear window defogger switch is turned on.

Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in smart entrance control unit)

Does it have power locks ?

TIME CONTROL UNIT PFP:28491 Description (Without Power Door Locks) EKS003A6 OUTLINE The time control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger INPUT/OUTPUT System Input Output Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in time control unit) Rear window defogger Ignition switch (ON) Rear window defogger switch Rear window defogger relay

Interior lights blink off and on ????? As in dome lamps, dash light's etc...??? An what the heck is this mean We were told to hinge the module?????? I have been an automotive technician over 30 yr's an never heard the term hinge the module. The interior lighting on your vehicle is controlled by the smart junction box , ford's BCM body control module . ( Electronic's ) Who checked the vehicle ? Dealer ?
Interior Lighting The interior lighting system consists of the following:

• Smart junction box (SJB)
• Interior/map lamp assembly
• Rail lamps (if equipped)
• Glove compartment lamp assembly
• Dimmer switch
• Illuminated vanity mirrors (if equipped)
• Rear cargo lamp
• Puddle lamps (if equipped)
• Door ajar switches
• Liftgate glass ajar switch

The interior lighting system consists of 2 subsystems:

• Courtesy lamps
• Demand lamps

The courtesy lamps are controlled by the SJB. The courtesy lamp subsystem consists of the ajar switches, the interior dome lamps, the puddle lamps, the roof rail lamps, the cargo lamp, and the overhead console lamps (if equipped). The SJB supplies voltage to the courtesy lamps when the SJB receives the required input.
The demand lamps subsystem consists of the glove compartment lamp, the dimmer switch, the cargo lamp, all map/reading lamps, the roof rail lamps, and the LH and RH vanity mirror lamps.
The SJB supplies power to the interior lighting system. The SJB sets DTCs if certain circuit failures exist with the interior lighting system.
Visual Inspection Chart Mechanical Electrical

• Courtesy lamps
• Map lamps
• Vanity lamps
• Door ajar switches

• Smart junction box (SJB) fuse(s):
  • 9 (15A)
  • 10 (15A)
  • 25 (10A)
• Circuitry
• Courtesy lamps
• Map lamps
• Cargo lamps
• Vanity lamps
• Glove compartment lamp
• Dimmer switch
• SJB

1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

1. NOTE: Make sure to use the latest scan tool release software. If the cause is not visually evident, connect the scan tool to the data link connector (DLC).

1. NOTE: The vehicle communication module (VCM) LED prove-out confirms power and ground from the DLC are provided to the VCM. If the scan tool does not communicate with the VCM:
   • Check the VCM connection to the vehicle.
   • Check the scan tool connection to the VCM.
   • Refer to Section 418-00 , No Power To The Scan Tool, to diagnose no communication with the scan tool.

1. If the scan tool does not communicate with the vehicle:
   • Verify the ignition key is in the ON position.
   • Verify the scan tool operation with a known good vehicle.
   • Refer to Section 418-00 to diagnose no response from the powertrain control module (PCM).

1. Carry out the network test.
   • If the scan tool responds with no communication for one or more modules, refer to Section 418-00 .
   • If the network test passes, retrieve and record the continuous memory DTCs.

1. Clear the continuous DTCs and carry out the self-test diagnostics for the SJB.

1. If the DTCs retrieved are related to the concern, go to the Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Chart or the Power Liftgate Module Diagnostic Trouble Code (DTC) Chart. For all other DTCs, refer to Section 419-10 .

1. If no DTCs related to the concern are retrieved, GO to Symptom Chart .

Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Chart DTC Description Action B1320 Driver Door Ajar Circuit Open Go To Pinpoint Test C . B1328 Passenger Door Ajar Circuit Open Go To Pinpoint Test C . B1331 Decklid Ajar Rear Door Circuit Failure Go To Pinpoint Test C . B1336 Door Ajar RR Circuit Open Go To Pinpoint Test C . B1572 Door Ajar LR Circuit Go To Pinpoint Test C . B1688 Lamp Dome Input Circuit Short to Ground Go To Pinpoint Test C . B2077 Liftgate Ajar Circuit Failure Go To Pinpoint Test C . B2A35 Interior Lighting Output Circuit Open If the courtesy lamps are inoperative, Go To Pinpoint Test A .
If the courtesy lamps stay on continuously, Go To Pinpoint Test C . B2A36 Interior Lighting Output Circuit Short to Ground Go To Pinpoint Test A . B2A39 Puddle Lamp Output Circuit Open Go To Pinpoint Test J . B2A3A Puddle Lamp Output Circuit Short to Ground If the puddle lamps are inoperative, Go To Pinpoint Test J .
If the puddle lamps are always on, Go To Pinpoint Test L . All other DTCs - REFER to Section 419-10 .

2003 Kia Spectra Car Stereo Wiring Color Codes
Car Radio Battery Constant 12v+ Wire: Pink
Car Radio Accessory Switched 12v+ Wire: Green
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Red/Black
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): White/Green
Left Front Speaker Negative Wire (-): White/Brown
Right Front Speaker Positive Wire (+): Yellow/White
Right Front Speaker Negative Wire (-): Yellow/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown/Black
Left Rear Speaker Negative Wire (-): Brown/Green
Right Rear Speaker Positive Wire (+): Light Green/Yellow
Right Rear Speaker Negative Wire (-): Ornage/Black

Car Radio Constant 12v+ Wire: Blue/Yellow
Car Radio Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Violet
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White

Constant 12V+ Blue/Yellow
Switched 12V+ Gray
Ground Brown (or your own wire to a metal grounding point)
Illumination Green
Antenna Trigger Black/Red

Front Speakers 4" Dash
Left Front (+) Pink
Left Front (-) Purple
Right Front (+) Green
Right Front (-) Blue

Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Black
Left Rear (-) Yellow
Right Rear (+) Red
Right Rear (-) White

I a '83 camry, there are 2 seperate plugs that go into a factory radio.
One for Power/and front speakers, and the other for rear speakers.

Sounds as if you are missing part of the harness for the rear speakers (or it is shoved in the back of the dash unused by the previous install). If there is not an un-cut plug in the dash - your only course of action would be to run your own set of speaker wire to the rear.

See this picture... these are the plugs that should go into your factory radio....


Metra kit 71-1938 will go from your factory wiring directly into your factory radio.


Thanks for using FixYa - a FixYa rating is appreciated for my effort in answering this Freebie question.

u need the colors of the radio or the car wires.... here are the car wires and the radio are below that. I suggest however gettiing a wiring kit..They are around 8 dollars and well worth the money. It makes is so easy to connect a radio.
RADIO 12V|orange + at radio
RADIO GROUND Black
RADIO SWITCH yellow
POWER ANTENNA dk. green at radio LF SPEAKER tan - gray at radio or LF speaker
RF SPEAKER lt. grn - dk. grn at radio or RF speaker LR SPEAKER brown - yellow at radio or LR speaker
RR SPEAKER dk. blu - lt. blu at radio or RR speaker

Radio wiring
constant power yellow
switched power red
power antenna/amp turn on blue
illumination is orange
all speakers the one with the black stripe is the negative connection.
right rear is purple
left rear is green
left front is white
right front is grey

hope that helps ya...

Hi,

Most Honda ABS warning light will blink in 2 parts, main system and then sub system to form the code pair. As an example is 3 blinks then 3 blinks is a code 3-5. Once determined, reference below listing.
1 - ABS pump motor over-run
1 2 ABS pump motor
1 3 high pressure leakage
1 4 pressure switch
1 8 high pressure system
2 1 parking brake
3 1 pulser RF
3 2 pulser LF
3 4 pulser RR
3 8 pulser LR
3 12 different diameter tires
4 1 wheel sensor RF
4 2 wheel sensor LF
4 4 wheel sensor RR
4 8 wheel sensor LR
5 - rear wheel lock - R/L
5 4 rear wheel lock - R
5 8 rear wheel lock - L
6 - fail-safe relay - F/R
6 1 fail-safe relay - F
6 4 fail-safe relay - R
7 1 solenoid - RF
7 2 solenoid - LF
7 4 solenoid - R
8 1 ABS function
8 2 CPU comparison
8 4 IC self-check

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.