Location of the erg sensor on 2000 ford ranger
The egr valve has two sensors. One is an EGR position sensor which is physically attached to the EGR valve. The other sensor is the DPFE (Delta Pressure Feedback EGR) sensor, commonly called the EGR pressure sensor. It's location varies depending on the engine you have. You can fine this sensor by following the vacuum hose on the EGR valve. It will be with in inches of the EGR valve. The sensor will be black (plastic) or silver (metal), have two or three vacuum ports and an electrical connection on it.
The vacuum pressure sensor is a high failure item on fords. Any Ford parts department will have one in stock, as well as some aftermarket parts stores.
The new sensor may not look exactly the same as the old part, but will have all the hook ups as the old one. You may also need to replace the vacuum hose to the sensor as well
The EGR valve is usually UFO shaped. There is a vacuum line that goes from the top of it to the EGR sensor. That's how it is with my 4.0L SOHC. Hope this helps. God bless
1,179 views
Usually answered in minutes!
replacing a Ford Ranger year 2000 2.4 CID stater motor
×