Hi i have toyota hiace 1994 1kz engine and it has fuel knock and cut off when its warm
SOURCE: 1994 toyota pickup code reading
Jump E1 and Te1 under the hood, and count the flashes of the check engine light with the key on.
SOURCE: how to reset timing belt
usually 2 options to reset toyota light.
1.remove small rubber plug in dash clear lense.use a long thin rod to reach in and push the small reset button at the bottom of the gauges.Light will extinguish.
2.remove the instrument panel and unplug all from behind to turn it over.Usually in the centre of the rear you will see two holes and 1 screw.for t-belt.shift the screw to other hole.refit dash ensuring all the plugs are refitted.Light should now be out.
SOURCE: Toyota Hiace 99 Fuel filter change
Look first right rear back under fuel tank,< If not, follow fuel lines from fuel tank one main line, one return line, traveling parallel to frame all the way to the motor compartment on front, can be front under right passenger side, first by the filter at the auto parts, that way you will know what to look for
SOURCE: Location of knock sensor on 1994 toyota 22vre engine
The Knock sensor on a 22re is located under the intake manifold on the engine block. to the upper left of the oil filter. With is the passenger side of the engine. I believe it is yellow in color. Not do be confused with the oil pressure sensor which is close by. The knock sensor has a larger electrical connector. Good luck it can be hard to get to.
SOURCE: 1994 dodge caravan check engine light comes on
These are all the definitions for your codes.
It's hard to give an exact cause for these codes because of there are a number of different items that could cause these.
The first one could be caused by Incorrect camshaft timing,
VCT solenoid valve stuck open or continuous oil flow to piston chamber,
Camshaft advance mechanism binding, or faulty VCT unit,
The others are most likely bad sensors.
I wish I could be more help but it's difficult to trouble shoot this kind of problem without having the vehicle here in front of me.
Good luck
P0012 "A" Camshaft Position - Timing Over-Retarded (Bank 1)
P0032 HO2S Heater Control Circuit High (Bank 1 Sensor 1)
P0055 HO2S Heater Resistance (Bank 1, Sensor 3)
1,180 views
Usually answered in minutes!
×