Crankshaft sensor change
You have to take off crankshaft pulley.
SOURCE: to remove crankshaft pulley
use a three arm puller to remove this , useing a prybar on the flywheel will cause teeth damage and make for more repairs .
SOURCE: where is the oxygen sensor on a 2005 Hynudai
Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.
SOURCE: My mechanic is having trouble locating the
hi,
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.
SOURCE: HOW DO YOU REPLACE A
The sensor should be mounted with 2 screws. The location should be between the airfilter box and the engine or the otherside of the engine where the belts are located, and would be near the timing cover.
To help locate it, it will look like this;
SOURCE: how to replace a crankshaft
Some of these late 05 models have the sensor located on the bellhousing of the trans where the flywheel is located
A word to the wise... replace the O2 snsr as well.
660 views
Usually answered in minutes!
×