Check engine light come on and off and the codes P0700, P0741, P0733 and P0734 are now coming up what are there meaning to have knowledge of repair
Bad A/T
automatic transmissions are complex, and expensive to repair /replace.
take it to an ASE pro.
The suzuki has factory codes too, so you need them for full diagnosis.
that takes a special too, not just your generic P0 codes.
this tells me , the tranny is slipping
tcc not locking up and 3nd and 4 gear , not right ratio.
slips. and that is serious. get a full diagnosis.
5sp M/T/s rule, A/T not.
SOURCE: Check engine light meaning
if the check engine lught blinks it usually means you've got a lttle problem. steady could mean a bigger engine or transmission problem. My engine light came on, I had it checked it showed a huge vacuum leak. my gas cap needed replacing end of light.
SOURCE: check engine light
I found that my check engine light comes on when I fail to turn the gas cap two clicks. It has something to do with the air . After I paid $50 for one of those diagnostics, I always make sure when it comes on to check if my husband failed to click the gas cap, correct the problem and the check engine light goes out before I have to gas up the next time and will stay off as long as I am the sole driver.
SOURCE: misfire code on #3 cyl. 2004 Suzuki Verona
I had the same problem I disconnected the battery to reset computer when I was changing my plugs & ignition wires! hope this helps
SOURCE: Check Engine light reset on 2004 Suzuki Verona
You can disconnect the negative cable of the battery for a couple of minutes (but you will lose radio settings and possibly others that the car will relearn), or you can go to an auto parts store such as Advance Auto or Pep Boys and they have a free scanner service to diagnose problems that should be able to reset the light. Mine does.
805 views
Usually answered in minutes!
×