Easy defeat, go to the starter relay ,open the starter relay,take out the cover insert back in place collapse starter relay, does it crank over?There is another way I need to know if this works,you will need a toothpick
SOURCE: alarm activated,lights are flashing can't start vehicle
if alarm is activated, it could be shutting off the starter, hence no starting....you may have to have a locksmith or electronics place disable the alarm so you can at least drive the thing
SOURCE: 1995 jeep grand cherokee,i want
the security module is located behind the dash trim at the glove box. remove glove box door, and top crash pad, and trim around glove box door. The security module is mounted behind the trim panel. Unplug it and it bypassed.
SOURCE: 1995 JEEP GRAND CHEROKEE RAN AND DIED WILL NOT START
IS IT THE 4.0L?IF SO U MAY HAVE A BAD CRANKSHAFT POSITION SENSOR.
SOURCE: 1996 Jeep Grand Cherokee alarm keeps randomly going off.
this happened to me recently with my 96 grand cherokee. the battery got drained by the alarm going off randomly at night. i pulled the fuse for the horn so at least my neighbors would only be bothered by flashing lights. then i couldn't jump the car because the alarm was still going off. i hooked my car to jump it to another car, and then i had to deactivate the alarm first by putting my key in the driver side door and unlocking the car. then i left it hooked to another car and still getting power but didn't jump it for at least 5 minutes in case the computer needed to reset. then it jumped fine. from what i've read online, this is a common problem that can be avoided if you stop using the power locks and always manually lock and unlock the doors with your key. its a little annoying, but apparently the power locks are connected to the alarm issue. hope the same works for you.
SOURCE: security light flashing wont let you start jeep
the alarm seems to be activated. press the button and turn the key.
57 views
Usually answered in minutes!
×