Timing mark for volvo 940 1995 model - 1991 Volvo 940

Another timing belt question Volvo Forums Volvo Enthusiasts Forum
Volvo Timing Belt Replacement S60 Timing Serpentine Tensioner Rollers...
A simple question but the answer is not simple. The vid is purportedly good and you'd be much better joining the forum or an other Volvo forum if you aren't in uk, if you run into problems.

Hi, this is how to align timing on a 1991 Volvo 740.
There are marks for all three. Cam and Aux shafts have dots on face of outer gear. Cam lines up with mark on rear timing cover(about 1 o'clock). Aux lines up with mark on seal housing (about 3 o'clock) and crank lines up with mark on seal housing (about 12 o'clock).

Take care

Click on the following free, direct Link. It has all the Timing Belt Mark Diagrams you will need.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1997/make/volvo/model/960/1997_volvo_960_timing_belt_diagram_marks.htm

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Volvo 960. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/volvo/model/960/1994_volvo_960_timing_belt_diagram_marks.htm

Click on the following Link. It has the necessary Timing Marks you will need.
http://www.2carpros.com/car_repair_information/year/1989/make/volvo/model/740/1989_volvo_740_timing_belt_diagram_marks.htm

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1998 Volvo V70. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1998/make/volvo/model/v70/1998_volvo_v70_timing_belt_diagram_marks.htm

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 2001 Volvo S40. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/volvo/model/s40/2001_volvo_s40_timing_belt_diagram_marks.htm

My apologies for the delayed response. I am going back to answer unanswered questions.

CLICK on the following LINK. It has all the Diagrams for your Timing Belt Marks that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!

http://www.2carpros.com/car_repair_information/year/2000/make/volvo/model/c70/2000_volvo_c70_timing_belt_diagram_marks.htm

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2000/make/volvo/model/v40/2000_volvo_v40_timing_belt_diagram_marks.htm

I hope you've solved the problem by now, but there are alignment marks on the crank shaft (top pulley), idler (lower side), and cam shaft (smaller, bottom pulley) which should be aligned with stationary marks on the timing belt rear cover.

The belt has marks that align with the aforementioned marks (lines). The double marks on the belt align with the camshaft marks and the single marks with the others.

Loosen the tensioner clamp (nut) to allow the spring loaded tensioner to press on the belt and retighten the nut.

Rotate the crank shaft (clockwise, probably two revolutions) and make sure the pulley marks realign to the marks on the cover (they don't have to realign with the marks on the belt).

Rotate the crank shaft a full revolution once the belt is on and check that alignment is preserved.

Periodically loosen and retension the tensioner nut (access through a hole in the cover) to ensure that tension is maintained as the belt relaxes.