How to remove soft top on streetka 04 model - 2006 Ford Ka Streetka

Question edited for clarity.
Question move to model category.

It looks like you will have to buy a service manual

https://www.google.com/search?q=Ford+StreetKa.+Wiring+diagram

Sometimes you can find part diagrams if you search

(year) Ford Ka (the part) wiring diagram

..

fusebox yellow 25 amp fourth from top left.

http://www.google.com/imgres?q=heater+resistor+pack+found+on+a+ford+streetka+location&hl=en&safe=off&sa=X&biw=1024&bih=677&tbm=isch&prmd=imvns&tbnid=jRCjBvRN9GIvOM:&imgrefurl=http://www.fk-oc.com/e107_plugins/forum/forum_viewtopic.php%3F16803&docid=4eD2vApyWwJHLM&imgurl=http://i268.photobucket.com/albums/jj36/klausmaster/IMG_0135.jpg&w=800&h=450&ei=uDR7UIfzH5TY9ATMnICgCQ&zoom=1&iact=hc&vpx=683&vpy=159&dur=3321&hovh=168&hovw=300&tx=98&ty=118&sig=115561133928977264950&page=1&tbnh=128&tbnw=247&start=0&ndsp=23&ved=1t:429,r:3,s:0,i:80

this may be fused or has a circuit locate fuse panel check these circuits if fuses are good remove the switch and check connection at switch as well as for power at the switch with a test light.

I think the fuse has blown for my electric windows on my Streetka 05. Where do I locate the fusebox?

When wiring the main 12v feed for the heated seats with integral switch buttons into the plug there are two wires (03 Street Ka): purple and black.

Which is which wire? I have assumed purple to ignition live and black to ground when wiring into a standard 1.3 Ka.

Is the button on position with the button out and red showing or pushed in?

Hi Sophie Probably just the hood store lid.
Unlock the hood. Pull up the rear screen and open the hood store lid. Slam the hood store lid shut making that the locks on BOTH sides are holding it down and then replace the hood. The alarm will not set correctly unless both the locks are in position. Adrian

hey did u get it fixed? mine did the same an auto electrician did it for £30 its the sensors inside that cause it x

my streetka keeps overheating iv changed the thermastat but its still over heating any idears wat it can be

how to remove front axle on chevy 4x4