2000 Pontiac Grand Am GT Logo

Related Topics:

Posted on Mar 22, 2017

Ignition Coil burn out

My 2000 Pontiac GrandAm Se was hesitating when the gas was pressed and after a few minutes of dragging and the stern wheel shaking/vibrating it would take off like a rocket. I was told that I needed a tune up and took it in for repairs after the tune up was done along with the coil and coil housing cover being replaced. When I went to pick up my car I tried to use the remote starter but it would half start and cut off the mechanic took a look at it and fixed it where it would stay started with the remote starter but said that the coil burned out and the engine light was on prior to the tune up an coil repkacement due to the remote starter(Is this possible? I've had the car for about 5yrs and the starter was put on by the dealership after purchase)

5 Related Answers

Anonymous

  • 4 Answers
  • Posted on Jan 30, 2009

SOURCE: 2004 pontiac montana minivan. engine

Have you checked your brakes

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 04, 2009

SOURCE: service engine soon light keeps coming on. Now low coolant light

I would start by doing an oil change myself so you can examine the oil and look for water/antifreeze in it. You will be able to see it separate from the oil and you can smell the antifreeze. If there is then you have a leak between the water jacket and the heads somewhere. More than likely the LOWER intake gasket is leaking into the head. You said they replaced a gasket but was it the UPPER or LOWER? If it was the LOWER did they use RTV in the correct areas? Did they torque the intake bolts to the correct pressure and install the bolts correctly? I know you don't have these answers but these could all be part of the problem. It may be leaking more at #2 cylinder and causing it to foul more than the others. Also just because a mech pressurized the coolant system and didnt see any change in pressure (hopefully he wasn't just looking for visible leaks) the issue may not happen until the engine is hot, as metals behave differently when heated, especially aluminum which the LOWER intake is made. Have a mechanic or mechanically inclined friend (gearhead) remove the #2 plug wire, then kick the engine a few times without starting it, enough to let any fluid get into the chamber, this would include gas btw. Then remove the plug and look for any wet residue on the plug, gas will evap. quickly, antifreeze/oil won't. again try to smell the residue and if necessary, lightly touch some to your tongue, antifreeze has a sugary sweet taste that is easily detectable. Remember any time you are working with chemicals such as waste oil and especially anti freeze, minimize spills and clean them up quickly and completely and place the spent fluid in a sealable container and take them to a collection center for disposal. Waste oil is a carcinagin (cancer causing) agent and antifreeze (glycol) new or old will kill any animal (child, dog, cat,etc) that ingests it. Many auto parts stores and some other retailers that sell oil and antifreeze will take your wastes if you bought the replacement fluid from them, check before you buy.

Anonymous

  • 17 Answers
  • Posted on Apr 09, 2009

SOURCE: 1994 pontiac transport se sluggish running

check the sparkplug wires on the firewall side for arching-body seam there that will cut them

Anonymous

  • 355 Answers
  • Posted on Mar 08, 2010

SOURCE: Possible security light problem on 1999 pontiac firebird...

if you have the chip in the key, then this will surely help you: http://newrockies.com/vatsbypass . It was the only thing that saved my car.

Anonymous

  • 238 Answers
  • Posted on Apr 29, 2010

SOURCE: 2001 Pontiac Montana - what is a misfire #5?

Without your actual trouble code, I am assuming that you are have a misfire on cylinder # 5. The computer cannot really tell what is causing the misfire only that cyl 5 is not putting out full power. If it misfires when cold then smooths out as it warms up, I would say it is probably an injector that is sticky, as it warms up it starts working properly.

Testimonial: "Thank you for your suggestion. I will have that checked out. I will also ask my mechanic what the actual trouble code says."

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I changed the stereo in a 2000 GrandAm SE and the tail lights and dash lights quit working. How do I fix the problem?

Did you chop up wires to install the new radio ? Is it a aftermarket radio ? You need to have some one check your work !
0helpful
1answer

Pontiac grandam 2000 key will not turn to start car wheel unlocked

Pull the steering wheel hard to the left and try turning the key at the same time.
0helpful
1answer

Will a 95 poniac grandam altinator interchange with a 2000 poniac sunfire

Go to e-bay and type in either or both of the alternators, and after searching a few of those offered for sale, you will see a list of all the different cars and models they fit. At accordingly.
Be blessed.
0helpful
1answer
0helpful
3answers

When im going down the road my 2004 pontiac hesitates you have to give it more gas

tune up, maintenance and likely an air filter required
Most new vehiclwes have a hesitation but if it is a definite lag then try the above
0helpful
1answer

1999 grandam se abs and trac off light is on what kind of exspence to be exspected

More than likely a wheel sencer. Depends if it is front or back. It would have to be scanned to find out which wheel it is.Most likely $400.00 to $500.00. Hope this helps
0helpful
1answer

I have a pontiac grandam and it want turn over or anything and I had the ignition and starter replaced. What could it be

It could be the security system...It often times masks its self as a starter ignition or battery issue....If this is the problem turn your key to the accessory mode for ten minutes...have jumper cables and another vehicle on hand should your battery die...This seems to be a common issue on these vehicles but if this is the problem it should start after leaving it on accessory for 10 min
5helpful
1answer

What is the correct tire psi for a 2000 grandam se

Should be 30psi.There should be a placard in the driverside door jam that psi should be printed on.Always best to comply with manufacturer recommendation versus what is printed on the tire as a maximum pressure.
Not finding what you are looking for?

320 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...